You are on page 1of 4

PRODUCT SAFETY DATA SHEET

FLOURA BINDER FTO

1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY/UNDERTAKING


Trade name Use Chemical Family Company : Floura Binder FTO : Textile finishing : Textile finishing binders : Fluro Chemical Industry PO Box No. 74900 Email: Info@flurochem.com Tel: +92(21) 5069481-2 Fax: +92(21) 5069065 Karachi Pakistan.

2. HAZARDOUS INGREDIENTS
Not Available

3. HAZARDS IDENTIFICATION
Eye: Take care in handling and keep away from eyes Skin : It hasnt any harm Ingestion : As a chemical, It is harmful for digestion system. Inhalation : Not available

4. FIRST AID MEASURES


Inhalation : Leave the site and breathe fresh air. Should the symptoms of dust inhalation persist? Consult a doctor. : Rinse mouth with water several times. Drink water, in order to cause vomiting. If necessary Consult a doctor. : In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention. : In case of contact, wash the skin with water

Ingestion

Eye contact

Skin

Radioactivity properties :This product has not any radioactivity effect

5. FIRE AND EXPLOSION DATA


Flammability Radioactivity Properties : Non-Flammable : This product has not any radioactivity effect

6. ACCIDENTAL RELEASE MEASURES


Dry-recover the product with the mechanical means available. Store it in suitable containers for re-employment or disposal according to regulations. Prevent the product to be discharged into the sewerage system or to reach surface waters

7. HANDLING AND STORAGE


Safe handling advice : Wash thoroughly after handling. Avoid contact with eyes. Avoid ingestion. : Keep container tightly closed when not in use. Keep out of moisture and direct sunlight.

Requirements of storage

8. EXPOSURE CONTROLS AND PERSONAL PROTECTION


Eye protection Skin protection : Avoid eye contact. Wear appropriate protective eyeglasses. : Protective gloves.

9. PHYSICAL AND CHEMICAL PROPERTIES


Appearance Nature Solid % Ionity Film Appearance PH(1:10 solution) : Milky Liquid : Pure acrylic emulsion binder : 38 1 : Anionic : Transparent soft : 5.5 - 7.5

10. STABILITY AND REACTIVITY


Stability : Stable under normal conditions of use.

11. TOXICOLOGICAL PROPERTIES


Harmful if swallowed. ACUTE OVEREXPOSURE EFFECTS : Inhalation Ingestion Eye contact Skin contact Acute toxicity : May cause sensitization. : Harmful if swallowed. : May cause irritation. : Not available. : Slightly Toxic

CHRONIC EFFECTS: Sensitization : Not available.

Carcinogenicity : This product is not classified as a carcinogen in accordance with COSHH


Regulations.

Mutagenicity

: Not available. : Not available.

Reproductive Toxicity

12. ECOLOGICAL INFORMATION


Aquatic toxicity : This product is present on the OCNS( Offshore Chemical Notification
Scheme ) List of Notified Chemicals and has been included in Group A .

13. DISPOSAL CONSIDERATIONS


Waste Disposal : Disposal should be made in accordance with EC, national and local regulations.

14. SHIPPING INFORMATION


Shipping Name AIR - ICAO/ IATA SEA - IMO/IMDG ADR/RID - ADNR : Not Restricted NA NA NA

15. REGULATORY INFORMATION


Name(s) On Label Classification / Symbol Risk Phrases Safety Phrases : Epizoacryl FTO : Non-hazardous : May be Irritating to eyes. : Wear suitable clothing, gloves and dust protection.

NOTE
The information provided in this Safety Data Sheet is correct to the best of our knowledge, All data and recommendations in this document are for guidance only and we can't be held responsible.

You might also like