Professional Documents
Culture Documents
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
Website: Email:
nsmitted in any form or by any means without prior written consent of Huawei
e stipulated by the contract made between Huawei and the customer. All or part of the ocument may not be within the purchase scope or the usage scope. Unless otherwise n, and recommendations in this document are provided "AS IS" without warranties, xpress or implied.
nge without notice. Every effort has been made in the preparation of this document to s, information, and recommendations in this document do not constitute the warranty of
This document lists BSC6680 V300R008C00 system MML commands and their functions. System MML commands are seldom us significant impacts on the network. If you need to use system MML commands, contact Huawei technical support personnel, and u MML commands with their assistance.
Structure
Command Name Function Parameters
This document lists BSC6680 V300R008C00 MML commands that contain expert parameters and the guidelines for using these p document only provides the MML commands and function overviews. If you need to modify expert parameters, contact Huawei tec personnel, and modify the expert parameters with their assistance.
Expert parameters are configurable parameters that are seldom used in the BSC. These parameters are configured with default va delivery, and modification to these parameters is not required in normal cases. Therefore, expert parameters are not displayed on maintenance system. According to the protocol requirements, these parameters must be configurable. In addition, modification to t is required in certain scenarios. Therefore, the BSC provides these parameters as expert parameters. After you enter an MML com contains expert parameters on the service maintenance system, choose System > Set Expert Scenario to display the expert para you can modify the displayed expert parameters.
Structure
MML Command Expert Parameter Function Expert parameters
MML Commands
ment lists BSC6680 V300R008C00 system MML commands and their functions. System MML commands are seldom used or have impacts on the network. If you need to use system MML commands, contact Huawei technical support personnel, and use the system mands with their assistance.
e
Name of the command. Function of the command. Parameters contained in the command.
arameters w
ment lists BSC6680 V300R008C00 MML commands that contain expert parameters and the guidelines for using these parameters. This only provides the MML commands and function overviews. If you need to modify expert parameters, contact Huawei technical support and modify the expert parameters with their assistance.
ameters are configurable parameters that are seldom used in the BSC. These parameters are configured with default values before nd modification to these parameters is not required in normal cases. Therefore, expert parameters are not displayed on the service ce system. According to the protocol requirements, these parameters must be configurable. In addition, modification to these parameters in certain scenarios. Therefore, the BSC provides these parameters as expert parameters. After you enter an MML command that xpert parameters on the service maintenance system, choose System > Set Expert Scenario to display the expert parameters and then odify the displayed expert parameters. Lists MML commands. Describes the function of expert parameters contained in the MML commands. Lists the expert parameters contained in the MML commands.
99693680.xls.ms_office
Function Blocks DSPs on the DPUSb or DPUDb. The BSC no longer allocates services to blocked DSPs. Only DSPs in the normal state can be blocked. Checks whether each channel in the protection groups working in 1:N mode is connected properly. If channels in a protection group are connected incorrectly, boards involved may reset when executing the command.
CHK PROTECTGRP
Clears the statistics about IP packets under the control plane on the FG1Aa, FG1Ba, FG1Pa, FG1Xa, PEUAa, PEUBa, FG2Aa, FG2Ba, FG2Pa, FG2Xa, PO1Ba, POUBa, PO1Aa, POUAa,POUBc,FG2Bc,GOUBc,FG2Ac or GOUAc interface CLR CTLIPLNKINFO boards. Clears the statistics about ML PPP links under the control plane on the PEUAa, PEUBa, POUBa, PO1Ba, PO1Aa, CLR CTLMPLNKINFO POUAa or POUBc interface boards. Clears the statistics about PPP links under the control plane on the PEUAa, PEUBa, POUBa, PO1Ba, PO1Aa, POUAa or CLR CTLPPPLNKINFO POUBc interface boards. Queries the bandwidth of physical ports and logical ports DSP A18LNKBW mapping A18 links over Ethernet links. Queries A18 link information, including link status, type, link DSP A18LNKINFO number, number of BE users, and bandwidth usage. Queries A3/A7 link information, including link status, type, link DSP A3A7BW number, and bandwidth usage. Queries radio resource information about carriers that support DSP BCMCRRRADIORES multicast services. DSP BSNINFO DSP CTCALLINF Queries the connection status of the BSN bound with the PCF. Queries call information about a group based on the specified group number during PTT services. Queries the statistics about IP packets under the control plane on the FG1Aa, FG1Ba, FG1Pa, FG1Xa, PEUAa, PEUBa, FG2Aa, FG2Ba, FG2Pa, FG2Xa, PO1Ba, POUBa, PO1Aa, POUAa,POUBc,FG2Bc,GOUBc,FG2Ac or GOUAc interface boards. Queries the statistics about ML PPP links under the control plane on the PEUAa, PEUBa, POUBa, PO1Ba, PO1Aa, POUAa or POUBc interface boards. Queries the statistics about PPP links under the control plane on the PEUAa, PEUBa, POUBa, PO1Ba, PO1Aa, POUAa, or POUBc interface boards. Queries the number of multicast groups that are registered with and activated on an AN. Queries information about IPC from a specified board or subsystem to another board or subsystem. Queries the license library versions of the FAM and the BAM.
DSP CTLIPLNKINFO
DSP CTLMPLNKINFO
6/7/2012
99693680.xls.ms_office
Queries the MOT information from a specified board or subsystem to another board or subsystem. Queries information about the board type, slot number, and subrack number of the PCF, load on the PCF, and the number of connections to the PCF. Queries the identifications of QChat multicast subscriber flows and A10 connections. Queries information about target clusters and supporting clusters of QChat multicast groups. Queries the QChat multicast group status based on a specified Call Setup flow ID. Queries the port number list of Ethernet ports connecting service links carried over TRUNK links. Obtains hardware check logs for the POUBc. After the command is executed successfully, the check results are printed in the logs. Queries information about the overhead bandwidth associated with the transmission protocol header used by Abis/A3 links. Queries whether board's automatic restoration for system kernel soft errors is enabled. Modifies the flag for starting and stopping the daylight saving time (DST).
DSP MOTNODEINFO
DSP PCFINFO DSP QCHATFLOWINFO DSP QCHATGRPRADIORES DSP QCHATGRPSTAT DSP TRFLNKPORT
MOD LNKHBW
Modifies the overhead bandwidth associated with the transmission protocol header used by Abis/A3 links.
6/7/2012
99693680.xls.ms_office
MOD SYSTEMRESTORESWT
Specifies whether to enable automatic restoration for system kernel soft errors. 1. Automatic self-recovery for board faults can be enabled or disabled for the FG1Ba, PEUBa, and GOUXa in independent mode and the PO1B in active/standby mode, independent mode, and 1:N mode. 2. Parameters Automatic Upgrade Switch of Board Chip Software, Switch for Recovery Upon Task Exception and L2 Table Fault Automatic Restoration Switch are valid for all boards. 3. The Switch for Board Logic Soft Resetting parameter is valid for the FG1Pa, FG2Pa, GOUPa, AEUBa, FG1Ba, PEUBa, FG2Ba, AOUBa, AO1Ba, PO1Ba, POUBa, FG1Aa, PEUAa, FG2Aa, POUAa, PO1Aa, FG1Xa, FG2Xa, GOUXa, and PIUOa. 4. The XPUOa Memory Access Optimization parameter is valid for the XPU. 5. The Automatic Fault Recovery Switch for TC Chip parameter is valid for the ECUOc and TCUOc. 6. The Automatic Fault Recovery Switch for EC Chip parameter is valid for the ECUOc. 7. Parameters Switch for DPU Restore Without Reporting Alarms, Board Repeated Reset Isolation Switch, Board Repeated Reset Isolation Threshold and Board Exception Reset Interval are valid for the DPUTb, DPUSb, DPUDb, ECUO, TCUOc, and ECUOc. Checks whether the destination IP address is reachable from the specified subsystem. Deletes all scheduled tasks except the BKP DB scheduled tasks defined for the BSC. Clears the wireless and transmission layer service data, and supporting data (excluding the network indicator table and flow index table) in the BAM database. Manually triggers automatic restoration of soft errors in the kernel on the PO1Ba, PEUBa, FG1Ba, or GOUXa. 1. This command is applicable only to PO1Ba boards in active/standby mode, independent mode, and 1:N mode, and other boards in independent mode. This command can be executed only after board's automatic restoration for system kernel soft errors is enabled. 2. When certain soft errors occur on the board kernel, run this command to quickly restore the system, saving the time for resetting the board and reducing the impacts of soft errors on services. Sets the time zone and DST information. If DST information is available in a time zone, set the start time and time offset for the DST.
RMV BSCTBL
RST CORE
SET TZ
6/7/2012
99693680.xls.ms_office
STR MELOOPTEST
Starts E1 or PPP link loopback tests. 1. Loopback tests can be performed only for the PEUBa and PO1Ba. Loopback tests can be performed only if the loopback test function is enabled. 2. Loopback tests must be performed on one link on a board at a time. In addition, only one loopback test can be performed within 30 seconds. 3. It is prohibited to manually starting loopback tests within 10 minutes after PPP or ML PPP links. Starts to reload microcodes. 1. Microcodes can be reloaded only to the FG1Pa, FG2Pa, GOUPa, AEUBa, FG1Ba, PEUBa, FG2Ba, AOUBa, AO1Ba, PO1Ba, POUBa, FG1Aa, PEUAa, FG2Aa, POUAa, PO1Aa, FG1Xa, FG2Xa, GOUXa, and PIUOa. Microcodes can be reloaded to these boards only when the microcode reloading function is enabled. 2. You can run this command to rectify non-hardware faults in the BSC. Unblocks DSPs on the DPUSb or DPUDb. If the unblocked DSP is in the normal state, the BSC may allocate services to this unblocked DSP.
STR MERELOAD
UBL SDUDSP
Modifies the configuration parameters of the DPUDb that processes EV-DO Rev. A services. Queries DSP troubleshooting parameters on the DPUSb and DPUDb boards.
MOD SDUFAULTPROC
Modifies DSP troubleshooting parameters on the DPUSb and DPUDb boards. Transfers CE resources controlled by BTS by the license. This command transfers 1X or EV-DO reverse CE resources allocated to a BTS by using the MOD BSCBTSINF command from a BTS to another BTS.
MOD BTSCE
Modify EV-DO Configuration Negotiation Parameters Modify EV-DO Global Configuration Negotiation Parameters
MOD DOQOSPP MOD DOEMPA MOD DOMMPA MOD DOMPA MOD RLMACFP
Modify QoS ProfileID Parameters Modify EMPA Configuration Negotiation Parameters Modify MMPA Configuration Negotiation Parameters Modify MPA Configuration Negotiation Parameters Modify EV-DO RL-MAC Flow Configuration Negotiation Parameters
6/7/2012
99693680.xls.ms_office
Modify EV-DO RL-MAC General Configuration Negotiation Parameters Modify Class User RL MAC Rate Para Modify EV-DO RL-MAC Rate Configuration Negotiation Parameters Modify EV-DO RL-MAC User Configuration Negotiation Parameters Modify EV-DO Revision B RL-MAC Flow Configuration Negotiation Parameters Modify EV-DO Revision B RL-MAC General Configuration Negotiation Parameters Modify EV-DO Revision B Class User RL MAC Rate Para Modify EV-DO Revision B RL-MAC Rate Configuration Negotiation Parameters Modify EV-DO Revision B RL-MAC User Configuration Negotiation Parameters Modify EV-DO Configuration Negotiation Basal Information Modify EV-DO Revision B RL-MAC T2P General Negotiation Parameters
MOD RLMACGP MOD RLMACRATE MOD RLMACRP MOD RLMACUP MOD DOBRLMACFP MOD DOBRLMACGP MOD DOBRLMACRATE MOD DOBRLMACRP MOD DOBRLMACUP MOD DOACNBI MOD DOBRLMTTPANP
MOD DOBRLMTTPCGP
Modify SDU DSP Reservation Parameters Modify the mapping of priority between the DSCP and MAC
Modify MTP2 Timer Parameters On EIUAa/OIUAa Modify QChat Forward Link DSCP
Modify QChat SlotCycle Modify Platinum Subscriber or Industry Subscriber EV-DO Revision A RL-MAC Rate Configuration Negotiation Parameters Modify Platinum Subscriber or Industry Subscriber EV-DO Revision B RL-MAC Rate Configuration Negotiation Parameters Add IMSI Binding Relations
6/7/2012
99693680.xls.ms_office
ADD BINDPDSN
6/7/2012
99693680.xls.ms_office
BSC6680 V300R008C00 System MML Commands and Parameters Parameter 1 FN (Subrack No.) Parameter 2 SN (Slot No.) Parameter 3 DSPNO (DSP No.) Parameter 4 Parameter 5
FN (Subrack No.)
FN (Subrack No.)
FN (Subrack No.)
SN (Slot No.)
FN (Subrack No.) SN (Slot No.) NBRANIP (Neighbor AN IP Address) NBRANIP (Neighbor LIBIP (Local Interface AN IP Address) Board IP Address) NBRBSCIP (Neighbor BSC IP Address) CN (Cell ID) SCTID (Sector ID) PCFIP (PCFIP address) UGID (TRUNK CALL NUM)
FN (Subrack No.)
FN (Subrack No.)
SN (Slot No.)
FN (Subrack No.)
SN (Slot No.)
SN (Slot No.)
6/7/2012
99693680.xls.ms_office
FN (Subrack No.) PCFIP (PCF IP Address) UATI (UATI) FLOWID (Flow ID) FLOWID (Call Setup FlowID) OBJ (Query Object)
SN (Slot No.)
FN (Subrack No.)
SN (Slot No.)
6/7/2012
99693680.xls.ms_office
ASSYSDIS ABLEFAU GOUXAALONESY LTRSMS ALONESYSDISABLE PEUBAALONESYSDIS FG1BAALONESYSDI SDISABLEFAULT W FAULTRSMSW ABLEFAULTRSMSW SABLEFAULTRSMS RSMSW (Automatic (Automatic Fault (Automatic Fault W (Automatic Fault (Automatic Fault Fault Rectification for Rectification for Rectification for Rectification for Rectificatio Independent-Mode Independent-Mode Independent-Mode Independentn for PO1Ba) PEUBa) FG1Ba) Mode GOUXa) Active/Sta ndby-Mode PO1Ba)
FN (Subrack No.)
SN (Slot No.)
FN (Subrack No.)
SN (Slot No.)
6/7/2012
99693680.xls.ms_office
FN (Subrack No.)
SN (Slot No.)
FN (Subrack No.)
SN (Slot No.)
FN (Subrack No.)
SN (Slot No.)
FLSETUPTIMER (RLP MAXLINKQOSDELTI RLPDELFCT Flow Setup Timer MER (Reverse QoS (Reverse RLP Length) Max Link Delay Timer) Delay Factor)
FN (Subrack No.)
FAULTRPTTHRESH FAULTPROCSW (Fault (DSP Fault Report Processing Switch) Threshold) SREVCENUM (Number of Transferred 1X Reverse CEs)
MINDSPL OGTHRES DSPLOGUSERFA H (DSP CTOR (User Log Fault Factor) Report Min SDOREVCENUM (Number of Transferred EV-do Reverse CEs) PERSID (PersonalityID) DBTSFN (Destinatio n Subrack No. of BTS) PARA1 (Parameter 1)
PROFLID (ProfileID) PROFLID (ProfileID) PROFLID (ProfileID) PROFLID (ProfileID) PROFLID (ProfileID)
PEAKRATE (Peak Rate) PARA1 (Parameter1) PARA1 (Parameter1) PARA1 (Parameter1) USERGRADE (Subscriber Grade)
6/7/2012
99693680.xls.ms_office
PARA1 (Parameter1) RATECLASS (rate level) PARA1 (para 1) RATEGRADE (RateGrade) PARA1 (Parameter1) USERGRADE (Subscriber Grade) PARA1 (Parameter1) USERGRADE PROFLID (ProfileID) (Subscriber Grade) PARA1 (Parameter1) RATECLASS (rate level) RATEGRADE (RateGrade) USERGRADE (Subscriber Grade) PARA1 (Parameter1) PARA1 (Parameter1) CONFIGID (Configuration Negotiation ParametersID)
FN (Subrack No.) DSCP (Differentiated Services Code Point) MACPRI (MAC priority)
SDUDSPPARA2 SDUDSPPARA1 (SDU (SDU DSP DSP Reservation Reservation Parameter 1) Parameter 2)
PROFLID (ProfileID)
SLOTCYCLE1 (SlotCycle1)
SLOTCYCLE2 (SlotCycle2)
SLOTCYCLE3 (SlotCycle3)
TRADERATEGRADE (RateGrade) PARA1 (Parameter1) TRADERATEGRADE TRADEDOBCARNUM (RateGrade) (Number Of Carriers) PARA1 (Parameter1) BEGINIMSI (Begin IMSI) ENDIMSI (End IMSI)
6/7/2012
99693680.xls.ms_office
PDSNIP (PDSN IP address)
6/7/2012
99693680.xls.ms_office
ML Commands and Parameters Parameter Parameter Parameter Parameter Parameter Parameter Parameter Parameter Parameter 6 7 8 9 10 11 12 13 14
6/7/2012
99693680.xls.ms_office
ETHFPMU XBW MPIPHCB (Head W (Head MPBW Bandwidth Bandwidth (Head of of Bandwidth ETH_FPM MP_IPHC) of MP) UX)
ATMFRAC ATMBW (Head ETHBW ATMUNIB ATMIMAB Bandwidth (Head W (Head W (Head of Bandwidth Bandwidth Bandwidth FRACATM of ETH) of UNI) of IMA) )
6/7/2012
99693680.xls.ms_office
ONEANDN SYSDISAB LEFAULT RSMSW (Automatic Fault Rectificatio n for 1:N ProtectionMode PO1Ba)
XPUBOAR BOARDLO DOPTSW GICSOFT (XPU RSMSW Memory (Board Access Logic Soft Optimizatio Reset) n)
DPUREST ORENOR PTALMSW (Switch for DPU Restore Without Reporting Alarms)
ST (Start time)
EWSEQ EDAY (End week EWEEK ET (End (End date) sequence) (End week) time)
6/7/2012
99693680.xls.ms_office
PHYBWE QFACT VARSENS (physics T (Delay Bandwidth Var Equivalent Sensitive) Factor)
6/7/2012
99693680.xls.ms_office
6/7/2012
99693680.xls.ms_office
6/7/2012
99693680.xls.ms_office
6/7/2012
99693680.xls.ms_office
6/7/2012
99693680.xls.ms_office
6/7/2012
99693680.xls.ms_office
6/7/2012
99693680.xls.ms_office
6/7/2012
99693680.xls.ms_office
If this parameter is set to Packets from the M2000, the command result displays the value formats (hexadecimal or decimal) in a column. If this parameter is set to Packets from the LMT, the command result does not display the value formats in a column. To set the value formats, run the SET LOCALPARA command. Specifies the number of reverse CEs available for 1X/EV-DO services allocated to BTSs when the license control is implemented at the BTS level.
If this parameter is set to Yes, expert-level information can be queried. By default, the queried information is saved in ..\Airbridge\Log\ExpertReport but is not displayed on the service maintenance system. Specifies the average number of error frames used by the BSC when no power measurement report is received during slow power control.
MOD FER
Specifies the target (or expected) forward and reverse FERs on each channel carrying voice or data services.
6/7/2012
30110
99693680.xls.ms_office
Specifies the thresholds for starting and stopping forward power control. Configures the step for forward power control.
Specifies thresholds for starting and stopping rate reduction mode due to heavy load. MOD FLDCTRL Specifies the conditions that the BSC uses to control the deletion of a leg or forward channel.
Specifies the load or time thresholds for different FERs during power control. Specifies the conditions that control the uses of the access load control parameters.
Specifies the thresholds for determining the poor coverage state. MOD WSHO Configures the parameters for adjusting the forward gain. Configure the parameters related to soft handoff. MOD PHOALG MOD HO Specifies whether to enable certain handoffs. Specifies the thresholds for adding or deleting legs in the active sets of soft and softer handoffs. Specifies the maximum number of legs in the macro diversity for 1X hard handoffs. Configures parameters related to power measurement report messages for 1X data services.
Configures parameters related to releases of SCHs initiated by the BSC. MOD CHM Configures parameters related to assignment of forward SCHs and SCH soft handoffs. Configures parameters related to assignment of reverse SCHs and SCH soft handoffs.
6/7/2012
31110
99693680.xls.ms_office
MOD BSCPWR Configures parameters related to power synchronization. MOD SDU1XIP Configures parameters related to transmission rate control frames sent from the BSC to the UMG in A over IP.
Configures parameters related to pilot pollution detection in EV-DO services. Specifies whether to enable the function of detecting EV-DO missing neighboring cell configuration. MOD DOHO Specifies the maximum number of legs in the macro diversity for EV-DO hard handoffs.
Configures parameters related to inter-AN soft handoffs for EV-DO Rev. B services.
MOD DORPCP
Configures parameters for adjusting power control threshold (PCT) values of reverse out-loop power control in EV-DO Rel. 0 services and also configures parameters related to PCT when no data is transmitted. Specifies the maximum number of MAC frames in an Abis service packet for EV-DO services carried on the forward traffic channel (FTC). Specifies the maximum number of DataReady transmissions for EV-DO services and the length of the timer for awaiting the response to the DataReady message.
MOD DOSDUPARA Configures parameters such as the data buffer size, timer length, and number of transmissions for Radio Link Protocol (RLP) in EV-DO services. Configures parameters such as the number of retransmissions, timer length, and transmission buffer length for Signaling Link Protocol (SLP) in EV-DO services. Specifies the timer length of switching to inactive period due to heavy EV-DO service load. MOD DOLOWRATEUSER Configures the identification parameters for low traffic optimization and the scheduling method.
6/7/2012
32110
99693680.xls.ms_office Specifies the threshold for triggering an AN-assisted inter-AN idle handoff. If the differences of the pilot strength between an external AN and the current AN is greater than or equal to the value, an AN-assisted inter-AN idle handoff is triggered. Specifies the buffer size for saving forward RLP subscriber data in 1X data services. Configures parameters related to detection of Abis traffic links, detection of error frames, and cyclic redundancy check (CRC) of service frames.
MOD SDU1XTRAU
Configures parameters related to the rate adjustment of 1X speech frames. The default value is No. In this case, if the specified Real LAC or NBR LAC do not exist, an error message is displayed. You are not allowed to run this command. If this parameter is set to Yes, the command can be executed but does not take effect when the specified Real LAC does not exist. If the specified NBR LAC does not exist, it is automatically changed to 0. Configures the mapping between QoS values on the MSC and those on the BSC.
MOD QOS
Configures parameters related to scheduling of data services. MOD FEIBPC Configures parameters related to power adjustment of the forward erasure indicator bit (EIB) power control algorithm after error frames are received on the FCH and SCH. Configures parameters related to power control on dedicated control channels (DCCHs). MOD FFASTPC Specifies the offset values for active sets with different number of SCHs and FCHs in 1X data services and also the offset values for different SCH coding schemes. Configures parameters related to the duration for SCHs allocated to 1X data services and the SCH rate. MOD SCH
6/7/2012
33110
99693680.xls.ms_office MOD SCH Configures parameters related to the SCH power offset for 1X data services. MOD RCLPC
Configures parameters related to reverse closed-loop power control. Specifies the number of equivalent channels corresponding to RCs and services. Specifies the forward load weight used by the admission algorithm for calculating the carrier load.
MOD CHINF
Specifies the ratios of resources allocated to 1X voice and data services. Specifies EPACA Resource Available Threshold used in the admission algorithm. Configures parameters related to RC adaptive allocation algorithm.
Configures the RSSI floor noise and reverse interference decision parameters in the reverse load control algorithm.
Specifies the threshold offsets for SCH admission and DCCH admission in the reverse load control algorithm. MOD RLDCTRL Configures the parameters related to the reverse high FER algorithm.
Configures the rate reduction mode due to reverse heavy loads. Configures the reverse COP initial value.
6/7/2012
34110
99693680.xls.ms_office
MOD DOGP
MOD DOQOS
Configures the QoS strategy for BE flows of EV-DO class subscribers. Configures the schedule weight and reverse rate transition probability for EV-DO Rel. 0, EV-DO Rev. A, and EV-DO Rev. B subscribers. Configures parameters related to the reverse load control algorithm for EV-DO services. Configures parameters related to adjustment of PCT values in the reverse out-loop power control algorithm for EV-DO Rev. A or EV-DO Rev. B services.
MOD DORLCP
MOD DOARPCP
MOD DOARPDS
Configures the mapping between the target PER for EV-DO Rev. A or EV-DO Rev. B services and the decrease step. Configures the method for measuring carrier load in the hard assignment algorithm.
MOD DOACAP
Specifies whether to enable hard assignment and the thresholds for hard assignment.
MOD DOAFLCP
Specifies the maximum bandwidth offset and timeslot occupancy ratio offset of EF flows and AF flows for load control of EV-DO Rev. A or EV-DO Rev. B services.
Configures parameters about scheduling optimization for lowthroughput EV-DO Rev. A or EV-DO Rev. B subscribers.
MOD DOARLCP
Configures parameters of the load control algorithm for access channels in EV-DO Rev. A or EV-DO Rev. B services.
Configures parameters of the reverse load control algorithm for BE flows in EV-DO Rev. A or EV-DO Rev. B services.
6/7/2012
35110
Specifies whether passwords are transmitted in plain text mode or encrypted mode.
6/7/2012
36110
99693680.xls.ms_office
REVCENUM (1X Reverse CE DOREVCENUM (EV-DO Number) Reverse CE Number) PLTMINBR (Branch Number PLTRTHRS (Relative at Pilot Pollution) Threshold at Pilot Pollution) TFOREVERSE (Disabling The TFO reverse FER threshold) TFOTIME (FER Check Duration) MAXDIST (Max Distance between Neighbor Cell and Serving Cell) AECNLPGATE (AEC Nlp Gate)
ESTARVBADFRM (Estimated average bad frames) FWDVCDCCHFER1 (FDCCH Voice Service Expected FER1) REVVCDCCHFER1 (RDCCH Voice Service Expected FER1) FWDDATDCCHFER1 (FDCCH Expected Data Service FER1)
6/7/2012
37110
99693680.xls.ms_office
FWDSTARPWRTHR (Start Power Limit Threshold) FWDSTOPPWRTHR (Stop Power Limit Threshold) FWDTHRBIGSTEP (Ec/Ior Threshold Big Step)
ACHMAXVAL (Psist Max. Value) LBHHOETHRESH (Load Balance Hard Handoff Stop Threshold) WEAKECIOTHRESH (Active Set Ec/Io Threshold into Weak Coverage State)
ACHADJDELAY (Psist Adjust Delay) LBHHOPTHRESH (Load Balance HHO Power Threshold) WEAKFWDPWRTHRESH (Forward Power Threshold into Weak Coverage State)
OLBHHOCNUM (Outgoing Load Balance HHO Call Numbers) WEAKFWDFERTHRESH (Forward Fer Threshold into Weak Coverage State)
WCSHOSW (Weak LBHHOSW (Load Balance Coverage SHO Total Switch) HHO Switch) SOFTM (Dynamic Threshold SOFTERHOGAIN (Softer Slope for Adding Branch to Handoff Gain) Active Set) MBRANUMINTERHHO (Max. MBRANUMINTRAHHO (Max. Number of Inter-BSC HHO Number of Intra-BSC HHO Branches) Branches)
FWDLQHHOSW (Forward Link Quality HHO Switch) SOFTB (Dynamic Threshold Intercept for Adding Branch to Active Set)
6/7/2012
38110
99693680.xls.ms_office
FCHPWRADJTP (FCH FCHSTARTVALVE (FCH Power Synchronization Adjust Power Synchronization Start Type) Valve) RATECRTLSW (Downlink Voice Rate Control Switch) POLLUTENUM (Branch Number at Pilot Pollution)
TIMEALIGNSW (Downlink MODECTRLSW (Voice Mode Voice Time Adjustment Control Switch) Switch) POLLUTERELTRSHLD (Relative Threshold at Pilot Pollution) ADDMISSNBRPILOT (Add Missing Neighbor Cell Switch)
NORMALGFRAMED (PCT Down Step of Good Frame in Normal State) MAXMACFRM (Max. FTC MAC Frames Carried by an ABIS Service Capsule)
NODATAIFRAMEU NODATAMAXINC (Max. (PCT Up Step of IDLE PCT Increment in Frame in Nodata State) Nodata State)
6/7/2012
39110
99693680.xls.ms_office
ANHOCOMP (ANassisted Inter-AN HO Compare Threshold) RLPBUFFER (Forward Buffer Size per User) DCCHCHKERASFRMT DCCHCHKERASFRMR HD (Check DCCH AT (Check DCCH Erasure Frame Erasure Frame Ratio) Threshold) TMADJSTDL (Max. TMADJSTWIN (Speech RTCHGDL (Max. Delay Delay Frames of Speech Frame Delay Adjustment Frames of Speech Frame Delay Window Size) Frame Rate Change) Adjustment) ADVANCE (Timing Advance of Forward Frame to BTS)
EIBTCNT (Timer Length EIBUPSTP (Power Up after Bad Frame after Bad Frame Received) Received)
EIBDWNSTPS (Power Down after Good Frame Received with Timer Set to 0)
INITDCCH (DCCH Initial MAXDCCH (DCCH Max. MINDCCH (DCCH Min. Eb/Nt Value) Eb/Nt Value) Eb/Nt Value)
TFAC (Physical Channel NBRINTFFAC Transmission Efficiency (Neighbor Cell Factor) Interference Factor)
6/7/2012
40110
99693680.xls.ms_office
DCCHRLGAINADJ (Power Adjustment Gain of R-DCCH Relative to ACH) RC1EQU (RC1 Equivalent Voice Channels)
FCHMPLTGAINRC3 (Gain of RC3 R-PICH Relative to Main Channel for FCH) RC2EQU (RC2 Equivalent Voice Channels)
FCHMPLTGAINRC4 (Gain of RC4 R-PICH Relative to Main Channel for FCH) RC4EQU (RC4 Equivalent Voice Channels)
6/7/2012
41110
99693680.xls.ms_office CLASSBESTRATEGY (Class User BE Flow Paras Strategy) TRAN009K6019K2 (Transition009k6_019k2 ) ROTHIGHTHR (High ROTLOWTHR (Low Threshold of Rise Over Threshold of Rise Over Thermal) Thermal) NODATAMAXINCR NODATADELTA (PCL (PCL NoData Max NoData Delta) Increase) NORMGDFRMDELTA1 NORMGDFRMDELTA2 (PCL Normal Good (PCL Normal Good Frame Delta dB1024ths- Frame Delta dB1024ths0.1%) 0.2%) LDMEASMODE (EV-DO RevA Load Measure Mode) DOAMAXEFAFSLTOCC UTHRESH (EV-DO RevA MaxEFAFSlotsOccupan cy Threshold) SCHEWEIGHT (Scheduler Weight) TRAN019k2038k4 (Transition019k2_038k4 ) LHIGHTHR (EV-DO Rel0 High Threshold of Load) NODATAMAXPCT (PCL NoData Max PCT) NORMGDFRMDELTA3 (PCL Normal Good Frame Delta dB1024ths0.3%)
MAXEFSLTOCCUOFFS MAXEFAFBWOFFSET ET (Max. Slots (Max. Bandwidth Offset Occupancy Ratio Offset of EF And AF Flow For of EF Flow For Load Load Control) Control)
ACCCHCOLLSTHR ACCCHOCCUMAXOFS (Access Channel (Access Channel Max. Collision Ratio Occupancy Ratio Offset) Threshold)
6/7/2012
42110
99693680.xls.ms_office
6/7/2012
43110
99693680.xls.ms_office
Expert Parameter 4
Expert Parameter 5
Expert Parameter 6
MAXCONFAILTIMES (Max Number of Successive HO Failures to Start Penalty) AECSNRGATE (AEC SNR Gate) AECDECTECTSW (AEC Detect Switch) AECDTCTHRESHOLD (AEC Echo Check Threshold)
FWDVCFCHLOADFER1 (F- FWDVCDCCHLOADFER1 (FFCH Voice Service Expected DCCH Voice Service Heavy Load FER1) Expected Heavy Load FER1)
6/7/2012
44110
99693680.xls.ms_office
FWDTHRSMALLSTEP (Ec/Ior Threshold Small Step) STRRMDRELLDTHR (Basic Load Threshold for Enabling Heavy Loads Rate Reduction Mode) SPRRMDRELLDTHR (Basic Load Threshold for Disabling Heavy Loads Rate Reduction Mode)
GOODECIOTHRESH (Active Set Ec/Io Threshold into Good Coverage State) ADFWDGAINTHRESH (Forward Adjust Gain Load Threshold)
REVLQHHOSW (Reverse Link Quality HHO Switch) MAXARRITHR (PN Matching Threshold)
DSERVPWRRPTDEY (Data Service Measurement Report Delay) SCHRELBYPILSTSW (Pilot SCHRELBYFERSW (FER Strength Based SCH Release Based SCH Release Switch) Switch)
6/7/2012
45110
99693680.xls.ms_office
FCHDELAYFRAMES (FCH DCCHPWRSYNSW (DCCH Power Synchronization Delay Power Synchronization Frames) Switch)
INTRAANHHOMAXTARGNU INTERANHHOMAXTARGNU M (Max. Number of Intra-AN M (Max. Number of Inter-AN HHO Access Branches) HHO Access Branches) DOA17SCTTAKEMAXCRRN UM (Maximum Sector Carrier Number Carried by EV-DO Rev. B A17 Message)
RETXTLEN (RLP MAXRESETNUM (Max. RESETACKT (Wait Segmentation and RLPReset Sending ResetAck Timer Length) Retransmission Timer Times) Length)
6/7/2012
46110
99693680.xls.ms_office
DCCHWAITIDLEFRMT DCCHCHKIDLEFRMTH DCCHCHKDTXFRMRA MRLEN (Wait DCCH D (Check DCCH Idle T (Check DCCH DTX Idle Frame Timer Frame Threshold) Frame Ratio) Length)
EIBDWNSTPB (Power SCHEIBPC (SCH EIB Down after Good Frame Power Count) Received within Timer) DCCHINITGAINFIX (FDCCH Initial Power Correction Value) DCCHMAXGAINR1 (FDCCH Max. Gain1 Relative to Pilot)
SCHEIBPUS (SCH EIB Power Up Step) DCCHMINGAINR1 (FDCCH Min. Gain1 Relative to Pilot)
6/7/2012
47110
99693680.xls.ms_office FWDSCHASSREFPILO TGAIN (F-SCH Assignment Reference Pilot Gain) DCCHREVINIT (Initial Set Value for R-DCCH) E4XDATEQU (Data Service 4XSCH Equivalent Channels)
SCHINIPWRADJUST (SCH Init Adjust) DCCHMPLTGAINRC3 (Gain of RC3 R-PICH Relative to Main Channel for DCCH) E1XDATEQU (Data Service FCH(1XSCH) Equivalent Channels) DCCHMPLTGAINRC4 (Gain of RC4 R-PICH Relative to Main Channel for DCCH) E2XDATEQU (Data Service 2XSCH Equivalent Channels)
6/7/2012
48110
99693680.xls.ms_office
TRAN038k4076k8 (Transition038k4_076k8 ) LLOWTHR (EV-DO Rel0 Low Threshold of Load) MINPCTCHAG (PCL Min Significant PCT Change) NORMGDFRMDELTA4 (PCL Normal Good Frame Delta dB1024ths0.4%)
TRAN076k8153k6 TRAN019k2009k6 (Transition076k8_153k6 (Transition019k2_009k6 ) ) RSSIHIGHTHR (High Threshold of RSSI) BETWINCRINSUBFRM (PCL Delay Between Increase In Subframes) NORMGDFRMDELTA5 (PCL Normal Good Frame Delta dB1024ths0.5%) RSSILOWTHR (Low Threshold of RSSI) NUMFRFORNODATA (PCL Num Empty Frames For NoData) NORMGDFRMDELTA6 (PCL Normal Good Frame Delta dB1024ths0.6%)
DOAROTTHRESH (EV- RUSERRELATHRESH DO RevA ROT (Reverse User Relative Threshold) Threshold)
MAXEFAFSLTOCCUOF FSET (Max. Slots Occupancy Ratio Offset of EF And AF Flow For Load Control)
6/7/2012
49110
99693680.xls.ms_office
6/7/2012
50110
99693680.xls.ms_office
Expert Parameter 7
Expert Parameter 8
Expert Parameter 9
AECNLPATTENU (AEC NLP AECCNGMATCHLEV (AEC Attenuation Degree) Noise Matching Level)
FWDDATFCHLOADFER1 (F- FWDDATDCCHLOADFER1 FWDDATSCHLOADFER1X FCH Data Service Expected (F-DCCH Data Service (Forward 1XSCH Target Heavy Load FER1) Expected Heavy Load FER1) Heavy Load FER)
6/7/2012
51110
99693680.xls.ms_office
STRRMDCNTTHR (Time Threshold of Consecutive Heavy Loads for Enabling Rate Reduction Mode)
SPRRMDCNTTHR (Time Threshold of Consecutive Heavy Loads for Disabling Rate Reduction Mode)
FWDGAINAD (Forward Gain Adjust Value) MAXBRANCHNUM (Max. Active Set Branch Number)
SCHRELFRMDEL SCHRELTALFRMTHR (Total (Remained Frames Threshold Frames Threshold for SCH for SCH Release) Release)
6/7/2012
52110
99693680.xls.ms_office
DCCHPWRADJTP (DCCH DCCHSTARTVALVE (DCCH DCCHSTOPVALVE (DCCH Power Synchronization Adjust Power Synchronization Start Power Synchronization Stop Type) Valve) Valve)
NUMIDLEFORNODATA PCTMINCHANGE (PCT (Number of Idle Frames Min. Change Value Sent Required for Transition to Carrier) to Nodata State)
6/7/2012
53110
99693680.xls.ms_office
SCHEIBPDSS (SCH EIB Power Down after Good Frame Received with Timer Set to 0) DCCHMAXGAINR2 (FDCCH Max. Gain2 Relative to Pilot)
SCHEIBPDBS (SCH EIB Power Down after Good Frame Received within Timer) DCCHMINGAINR2 (FDCCH Min. Gain2 Relative to Pilot)
6/7/2012
54110
99693680.xls.ms_office REVSCHASSREFPILO TGAIN (R-SCH Assignment Reference Pilot Gain) MAXDCCH (Max. Value MINDCCH (Min. Value of DCCH) of DCCH) E8XDATEQU (Data Service 8XSCH Equivalent Channels) E16XDATEQU (Data Service 16XSCH Equivalent Channels) RC1TORC3 (Set Value Offset of RC1 Relative to RC3) E32XDATEQU (Data Service 32XSCH Equivalent Channels)
REVINTERFOCCTHRE REVRSSISTATWINSIZ REVRSSIABSOTHRES SH (Reverse E (Reverse RSSI H (Reverse RSSI Interference Occurrence Statistic Window Size) Absolute Threshold) Threshold)
6/7/2012
55110
99693680.xls.ms_office
TRAN038k4019k2 (Transition038k4_019k2 ) FLRNOISEESTIALG (Floor Noise Estimate Algorithm) BETWDECRINSUBFR M (PCL Delay Between Decrease In Subframes) NORMGDFRMDELTA7 (PCL Normal Good Frame Delta dB1024ths0.7%)
TRAN076k8038k4 (Transition076k8_038k4 ) FLRNOISEINITVAL (Initial Value of Floor Noise) MAXCONSCUTINCR (PCL Max Consecutive Increases) NORMGDFRMDELTA8 (PCL Normal Good Frame Delta dB1024ths0.8%)
6/7/2012
56110
99693680.xls.ms_office
6/7/2012
57110
99693680.xls.ms_office
Expert Parameter 10
Expert Parameter 11
Expert Parameter 12
FWDDATSCHLOADFER2X FWDDATSCHLOADFER4X (Forward 2XSCH Target (Forward 4XSCH Target Heavy Load FER) Heavy Load FER)
6/7/2012
58110
99693680.xls.ms_office
6/7/2012
59110
99693680.xls.ms_office
DCCHCALCUMETHOD (DCCH Power Synchronization Calculation Method) DCCHDELAYFRAMES (DCCH Power Synchronization Delay Frames)
6/7/2012
60110
99693680.xls.ms_office
DCCHMINGAINR3 (FDCCH Min. Gain3 Relative to Pilot) FAS1SAS1 (SCH Initial Eb/Nt FAS1_SAS1 Handoff Offset Relative to FCH) FAS2SAS1 (SCH Initial Eb/Nt FAS2_SAS1 Handoff Offset Relative to FCH)
6/7/2012
61110
99693680.xls.ms_office
RC2TORC3 (Set Value RC4TORC3 (Set Value Offset of RC2 Relative Offset of RC4 Relative to RC3) to RC3)
FWDLODWGT (Forward Load Weight) MINVCPCNT (Min. VDAPCTRLSW (Voice Resource Proportion Data Assignment Available for Voice Percent Control Switch) Services)
RSSINOISALGSW REVRSSIRELATHRES REVUSERRELATHRES (RSSI Noise H (Reverse RSSI H (Reverse User Estimating Algorithm Relative Threshold) Relative Threshold) Selection)
6/7/2012
62110
99693680.xls.ms_office
FILTERFACTOR (Forward Slot Occupancy Filter Factor) RRSSIVALIDMAX (Max. RRSSIVALIDMIN (Min. Reverse RSSI Valid Reverse RSSI Valid Value) Value)
LOWLDROTTHRLOW LOWLDROTTHRHIGH (Low Load Area Low (Low Load Area High Threshold of ROT) Threshold of ROT)
6/7/2012
63110
99693680.xls.ms_office
6/7/2012
64110
99693680.xls.ms_office
Expert Parameter 13
Expert Parameter 14
Expert Parameter 15
REVVOICEFCHFER1 (RFWDDATSCHLOADFER16 FWDDATSCHLOADFER32 FCH Voice Service X (Forward 16XSCH Target X (Forward 32XSCH Target Expected Heavy Load Heavy Load FER) Heavy Load FER) FER1)
6/7/2012
65110
99693680.xls.ms_office
STDELLEGTMTHR (Time Threshold of Consecutive Heavy Loads for Deleting Call Legs)
SCHRELSUMRATE (SCH Release Rate Sum(Based Overload)) FWDSASDYNSW (F-SCH Soft Handoff Dynamic Threshold Switch) FWDSASSLOPE (F-SCH Soft Handoff Slope)
6/7/2012
66110
99693680.xls.ms_office
MAXHOLES (Max. Holes Permitted by RLP Reassembly Buffer) WAITSLPDACKT (Value of Retransmission Timer for A Reliabledelivery) SNDQUELEN (SLP Sending Buffer Queue Length)
6/7/2012
67110
99693680.xls.ms_office
QOS12MAPGRADE QOS13MAPGRADE (QoS 12 Map HUAWEI (QoS 13 Map HUAWEI QoS Grade) QoS Grade) GOLDRATEWEIGHT (QoS Rate Weight of Gold Subscriber)
FAS3SAS2 (SCH FAS3SAS1 (SCH Initial Initial Eb/Nt Eb/Nt FAS3_SAS1 FAS3_SAS2 Handoff Handoff Offset Relative Offset Relative to to FCH) FCH)
6/7/2012
68110
99693680.xls.ms_office
REV4XSCHTHROFF REV1XSCHTHROFFS REV2XSCHTHROFFS SET (Reverse ET (Reverse 1XSCH ET (Reverse 2XSCH 4XSCH Threshold Threshold Offset) Threshold Offset) Offset)
6/7/2012
69110
99693680.xls.ms_office
RINTERFTHRESH RRSSIHIGHERTHRES RRSSISTATWINSIZE (Reverse Interference H (Reverse RSSI (Reverse RSSI Statistic Occurrence Interference Threshold) Window Size) Threshold)
MIDLLDROTTHRHIGH HIGHLDROTTHRHIG HIGHLDROTTHRLOW (Middle Load Area H (High Load Area (High Load Area Low High Threshold of High Threshold of Threshold of ROT) ROT) ROT)
6/7/2012
70110
99693680.xls.ms_office
6/7/2012
71110
99693680.xls.ms_office
Expert Parameter 16
Expert Parameter 17
Expert Parameter 18
DNMAXVALUE (Forward UPMAXVALUE (Reverse Clipping Decision Clipping Decision Threshold) Threshold)
REVDATADCCHFER1 (RREVDATAFCHFER1 (R-FCH DCCH Data Service Data Service Expected Heavy Expected Heavy Load Load FER1) FER1)
6/7/2012
72110
99693680.xls.ms_office
FWDSCHPWRESTSW (FFWDINITCOP (Forward COP SCH Power Estimate Initial Value) Switch) STHIFERRELLDTHR (Basic Load Threshold for Enabling High FER)
FWDSASADJECIODEALT FWDSASINTERCEPT (F- FWDSASWEIGHTECIO (FA (Delta Ec/Io Threshold SCH Soft Handoff SCH Soft Handoff Threshold for F-SCH Soft Handoff Intercept) Ec/Io Weight) Adjustment)
6/7/2012
73110
99693680.xls.ms_office
MAXRETX (Max. SLP Retransmission Times) HLINACTIVETLEN (Heavy load inactive timer length)
6/7/2012
74110
99693680.xls.ms_office
GOLDSATIWEIGHT SILVERRATEWEIGH BRONZERATEWEIGHT (QoS Satisfaction T (QoS Rate Weight (QoS Rate Weight of Factor Weight of Gold of Silver Subscriber) Bronze Subscriber) Subscriber)
FAS3SAS3 (SCH Initial Eb/Nt FERLESS3 (SCH Initial FAS3_SAS3 Handoff Eb/Nt FER [0,3] Offset Offset Relative to Relative to FCH) FCH)
6/7/2012
75110
99693680.xls.ms_office
LNKRPTFRQ (Power OLOOPPERSCH (RControl Report SCH Power Control Granularity) Period)
FEPACAVAL (EPACA Resource Available Threshold) RCUSAGEPOWER (RC RCUSAGEWALSH Adaptive Switch Power (RC Adaptive Switch Threshold) Walsh Threshold)
REV8XSCHTHROFF REV32XSCHTHROF REV16XSCHTHROFFS SET (Reverse FSET (Reverse ET (Reverse 16XSCH 8XSCH Threshold 32XSCH Threshold Threshold Offset) Offset) Offset)
6/7/2012
76110
99693680.xls.ms_office
RRSSIABSOTHRES RRSSIRELATHRESH H (Reverse RSSI (Reverse RSSI Relative Absolute Threshold) Threshold)
6/7/2012
77110
99693680.xls.ms_office
6/7/2012
78110
99693680.xls.ms_office
Expert Parameter 19
Expert Parameter 20
Expert Parameter 21
UPMUSICDETECTSWIT DNMUSICDETECTSWIT UPKPISWITCH (Reverse KPI CH (Reverse Music Check CH (Forward Music Check Statistic Switch) Switch) Switch)
REVDATASCHLOADFER REVDATASCHLOADFER REVDATASCHLOADFER4X 1X (Reverse 1XSCH 2X (Reverse 2XSCH (Reverse 4XSCH Target Target Heavy Load FER) Target Heavy Load FER) Heavy Load FER)
6/7/2012
79110
99693680.xls.ms_office
STHIFERCNTTHR (Time SPHIFERRELLDTHR Threshold of Consecutive (Basic Load Threshold for Heavy Loads for Enabling Disabling High FER) High FER)
SPHIFERCNTTHR (Time Threshold of Consecutive Heavy Loads for Disabling High FER)
FWDSASADJRATEDELT A (Delta Rate Threshold SCHTADD (SCH Soft for F-SCH Soft Handoff Handoff Tadd) Adjustment)
6/7/2012
80110
99693680.xls.ms_office
6/7/2012
81110
99693680.xls.ms_office
BRONZESATIWEIGH DSWINSIZE (Data T (QoS Satisfaction Service Scheduler Factor Weight of Window Size) Bronze Subscriber)
CONV1XSCH (1X CONV2XSCH (2X SCH SCH Initial Eb/Nt Initial Eb/Nt CONV CONV Offset Relative Offset Relative to FCH) to FCH)
6/7/2012
82110
99693680.xls.ms_office
MINDTXTHRESH RC8TORC3 (Set Value (Min. continuous DTX Offset of RC8 Relative Threshold) to RC3) RC8VOICECHNNUM (RC8 Equivalent Voice Channels)
DCCHTHROFFSET (Reverse DCCH Threshold Offset) REVFERLOADCTRL EQLCHANTH (Reverse User Threshold For Enabling High FER Reverse) REVRATEREDLOADCT RLEQLCHANTH (Reverse User Threshold For Enabling High Voice Rate Reduction Mode)
6/7/2012
83110
99693680.xls.ms_office
6/7/2012
84110
99693680.xls.ms_office
6/7/2012
85110
99693680.xls.ms_office
Expert Parameter 22
Expert Parameter 23
Expert Parameter 24
REVDATASCHLOADFER REVDATASCHLOADFER1 REVDATASCHLOADFER 8X (Reverse 8XSCH 6X (Reverse 16XSCH 32X (Reverse 32XSCH Target Heavy Load FER) Target Heavy Load FER) Target Heavy Load FER)
6/7/2012
86110
99693680.xls.ms_office
TFERFWDOL02 (Forward TFERFWDOL05 (Forward TFERFWDOL10 (Forward load corresponding to load corresponding to target load corresponding to target FER0.2%) FER0.5%) target FER1%)
FWDSASBASICRELTHR FWDSCHADJSLOPE (FESH (F-SCH Active Set SCH Adjust Slope) Basic Threshold)
6/7/2012
87110
99693680.xls.ms_office
6/7/2012
88110
99693680.xls.ms_office
CONV4XSCH (4X CONV8XSCH (8X SCH SCH Initial Eb/Nt Initial Eb/Nt CONV CONV Offset Relative Offset Relative to FCH) to FCH)
6/7/2012
89110
99693680.xls.ms_office
6/7/2012
90110
99693680.xls.ms_office
6/7/2012
91110
99693680.xls.ms_office
6/7/2012
92110
99693680.xls.ms_office
Expert Parameter 25
Expert Parameter 26
Expert Parameter 27
6/7/2012
93110
99693680.xls.ms_office
REVSASVALIDRELTHRE REVSASBASICRELTHRE REVSCHADJSLOPE (RSH (R-SCH Active Set SH (R-SCH Active Set SCH Adjust Slope) Valid Threshold) Basic Threshold)
6/7/2012
94110
99693680.xls.ms_office
6/7/2012
95110
99693680.xls.ms_office
6/7/2012
96110
99693680.xls.ms_office
6/7/2012
97110
99693680.xls.ms_office
6/7/2012
98110
99693680.xls.ms_office
6/7/2012
99110
99693680.xls.ms_office
Expert Parameter 28
Expert Parameter 29
Expert Parameter 30
Expert Parameter 31
6/7/2012
100110
99693680.xls.ms_office
REVSCHDURFOREEXTD REVSCHADJINTERCEPT TX (R-SCH Forever (R-SCH Adjust Intercept) Duration Extension DTX) FWDSCHEXTDURATIO FWDSCHEXTOVERLAP N (F-SCH Extension (F-SCH Extension Duration) Overlap)
6/7/2012
101110
99693680.xls.ms_office
6/7/2012
102110
99693680.xls.ms_office
6/7/2012
103110
99693680.xls.ms_office
6/7/2012
104110
99693680.xls.ms_office
6/7/2012
105110
99693680.xls.ms_office
6/7/2012
106110
99693680.xls.ms_office
Expert Parameter 32
Expert Parameter 33
Expert Parameter 34
6/7/2012
107110
99693680.xls.ms_office
FWDSCHEXTREQBUFFS FWDSCHEXTMAXTIMES FWDSCHJUDGETIMEOS W (F-SCH Extension (F-SCH Extension Max. (F-SCH Extension Judge Request Buffer Switch) Times) Time Offset)
6/7/2012
108110
99693680.xls.ms_office
6/7/2012
109110
99693680.xls.ms_office
ENRC11TORC3 ENRC5TORC3 (Eb/Nt Offset of (Eb/Nt Offset of Forward RC11 to Forward RC5 to RC3) RC3)
6/7/2012
110110