Professional Documents
Culture Documents
ANALOG ELECTRONICS II
Determine the
quiescent values
of ID and VGS.
Depletion-type
MOSFET bias circuits
are similar to JFETs.
The only difference is
that the depletion-
Type MOSFETs can
operate with positive
values of VGS and
with ID values that
exceed IDSS.
How to analyze dc
analysis for the
shown network?
It is a …. Type
network
Find VG or VGS
Draw the linear
characteristics
Draw the transfer
characteristics
Obtain VGSQ and IDQ
from the graph
intersection
• Plot line for VGS = VG, ID = 0 and ID =
VG/RS, VGS = 0.
• Plot the transfer curve by plotting
IDSS, VP and calculated values of ID.
5. Where the line intersects the transfer
curve is the Qpoint.
• Use the ID at the Qpoint to solve for
the other variables in the voltage
divider bias circuit. These are the
same calculations as used by a JFET
circuit.
When RS change…the linear characteristics will change..
• Plot line for VGS = VG, ID = 0
and ID = VG/RS, VGS = 0
• Plot the transfer curve by
plotting IDSS, VP and
calculated values of ID.
• Where the line intersects the
transfer curve is the Q
point.
• Use the ID at the Qpoint to
solve for the other variables
in the voltagedivider bias
circuit. These are the same
calculations as used by a
JFET circuit.
LOGO