You are on page 1of 40

Presentation About TEMS Program

Name: Enayatullah Amirzada ID: 712319

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Overview Data Collection

Analysis

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

DT Devices Structure

GPS

Mobile MS1

Mobile MS2

PC
PC HASP TEST DEVICE GPS

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Checking Instruments
To check the instruments, proceed as follows: 1. The required instruments should be complete and normal.

2. Accessories of drive test instruments should be complete and normal.


3. Power supply devices and batteries should be well prepared for drive test. 4. The software of drive test should be correctly installed and used. 5. The DT engineers must normally connect the required instruments with relevant accessories and confirm that both drive test software and devices can work normally.

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Collecting Network Information Data


Drive test engineers must collect relevant information, such as data of the network to be tested (including engineering parameters and cell

information) and maps, and then import them to drive test devices
before a test.

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Selecting Routes
Select drive test routes based on test scope, objectives and requirements. For exampleto ensure popularity of the drive test,

avoid selecting repetitive routes for a city test. However, specific


requirements from operators should be satisfied.

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

During a Drive Test


Antenna position of Test Terminal The external antenna should be installed on the roof above the

assistant drivers seat in the test vehicle.


If there is a dedicated test workbench (or drive test box), the test terminal should be placed at the special purpose position on the test workbench. If there is no test workbench (or drive test box), the test terminal should be placed on the position almost satisfying the above requirements. Note that all tests should be carried out at the assistant drivers seat in case of no test workbench.

Engineers must record actual situations not in compliance with the


above cases. Test terminals must not be placed randomly

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Vehicle Speed and Carriage Environment during a Test


Drive a vehicle at a required speed. If an external antenna is installed, there is no requirement for the

carriage; if not, it is recommended to close windows in the carriage.

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Recording Test File Information


During a drive test, record the test file name and the information related to actual test routes, and fill in drive test information table.

Note that this table and the drive test data should be saved into same
directory.

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

After a Drive Test


Based on test requirements and drive test guides for specific products, perform corresponding background processing on test data

and output corresponding test result documents. Where, it is


recommended to set legends based on the software default value.

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

How to Start the Data collection Program

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Idle & Dedicate Mode


During the DT tow Mobile will connect to TEMS one Mobile should be in Idle Mode and another should be in Dedicate Mode. Idle Mode: in Idle Mode the Mobile should not Call or receive a Call in this Mode just investigate about RXL. Dedicate Mode: in Dedicate Mode the Mobile should Call to Other number in this Mode we can investigate about the Situation of RXL &

RXQ both but in Idle Mode just RXL.

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

How to start the program


When we install the TEMS program after the Modification of all parameters if we want to save this modification & for the next time we

dont want to modify it again so there for click on File menu then click
on save workspace as For the next time it is not necessary to set the parameter again just Open workspace file and run the DT test.

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

How to make work space


Open TEMS file save workspace as

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

How to bring the cell id Map


General cell file load add Open the cell id map file

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Site View

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

How to Bring Road Map

Click on Open Map and select the Road map where you save it then click on Open the Road map will appears as in next slid.

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Road Map View

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

How to Connect the Equipment to TEMS


After the installation of Mobile and GPS software

when the equipment are


connect to the computer it will appear as this figure

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Connection of Equipment
For the connection of the equipment to this program click on this button or press (F2)

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

When all the Equipment connects to TEMS program the main thing

From these tow parts we can See the connection of equipment

that we know they are connect it will change the color from Red to green

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

How set the commend sequence


In commend sequence we set the duration of call

number which MS1


call to that
From here we can also Bring the commend Sequence

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

How to Run the commend sequence


After the modification of call duration phone number ETC then Click on Run & the DT will Start.
From here we can run the Commend sequence

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Command Sequence
Before this that we start the recording we should running the command sequence from

there we can run the


command sequence

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Start the DT test


and now we are Starting the
Click and starting the recording

Record of our
Program like that

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

From here we can record The DT test in log file

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Color Meaning

MS in Idle Mode

Cell Re-selection

MS in Dedicated Mode

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

How to Play the Log file


Click Open log file then select the log file where we save that and click open. Then click on Play

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

from this menu we can see the RXL, RXQ & etc

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Idle & Dedicate Mode


During the DT tow Mobile will connect to TEMS one Mobile should be in Idle Mode and another should be in Dedicate Mode. Idle Mode: in Idle Mode the Mobile should not Call or receive a Call in this Mode just investigate about RXL. Dedicate Mode: in Dedicate Mode the Mobile should Call to Other number in this Mode we can investigate about the Situation of RXL & RXQ both but in

Idle Mode just RXL.

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

How to Analysis the Log File

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

How To Export The Log File to MapInfo

If you want export a log file to MapInfo as it show in picture open TEMS program, than click on log file menu and from this menu click on Export Log file as it show in picture

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Process of Export The Log file


after that this menu will appear . Click on Add Order the Bellow menu will appear In Format Select MapInfo Tab-file as it show in Picture Click on Setup than the Bellow menu will appear in this menu click on Load and select MS1 or MS2 than click on Ok click on Browse file and select the Log file (DT File) Click on Browse that where it Export the Log file to MapInfo file than click Ok

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Export Log File to MapInfo

After that this menu will

appear in this menu Click on


Start the process will start and it will change the log file to MapInfo Tab-file

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Report Generator
Click on Log file menu then click on report generator the bellow menu will appear then click on Add and select the log file after that click on Properties

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Report Properties
From this menu tick mark GSM as it shows in report Properties menu then click on ok

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

MapInfo
Open MapInfo program then click on open and select the log file which it export from TEMS to MapInfo. If we want to check the RXL & RXQ Click on Map then click on Create Thematic Map the bellow picture which it shows in next slid will appear

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Create Thematic Map


from this menu select RXL then click Next After that the bellow menu will appear from this menu select the name of log file and from field select the Rx Level SubdBm

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Cross Connection

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

Thanks

All Rights Reserved HUAWEI TECHNOLOGIES CO., LTD. 2006

You might also like