You are on page 1of 140

INDIAN DENTAL

ACADEMY
Leader in continuing dental education
www.indiandentalacademy.com
www.indiandentalacademy.com
ARCH EXPANSION
Contents
Introduction
Arch dimensional changes with age
Need for arch expansion
Changes possible with orthodontic/orthopedic
treatment
Maxillary expansion
Mandibular expansion
Conclusion
References

www.indiandentalacademy.com
Introduction
Arch expansion and frequency of extraction
have very close but inverse relationship with
each other.


To Edward Angle and his followers in the early
20th century, extraction was anathema.



www.indiandentalacademy.com
In their concept, extraction destroys the
possibility of ideal occlusion or ideal
esthetics, both of which require presence
of all the teeth in any case.

Hence any space required for aligning
dentition was achieved by expansion of
arches.

www.indiandentalacademy.com
As it became clear that
arches could and did
collapse after
expansion despite
efforts to produce
ideal function,
extraction was
reintroduced in the
1930s in an attempt
to overcome relapse
problems


www.indiandentalacademy.com
Why did the first premolar extraction
percentages declined dramatically in the last few
decade?

Various long term studies demonstrated not
much difference between extraction and
nonextraction/expansion group regarding
esthetics, stability and occlusion.



www.indiandentalacademy.com
In Class I crowding cases,
nonextraction treatment
increases the prominence of
the lips, extraction decreases
it.


For satisfactory esthetics,
some patients require
extraction, some require
nonextraction treatment, and a
considerable group in the
middle could have acceptable
esthetics with either approach.


www.indiandentalacademy.com
In the treatment of Class I
crowding, stability probably
is greater with extraction than
nonextraction treatment, but
the difference is not as great
as was believed at the height
of enthusiasm for premolar
extraction.

As with esthetics, some
patients require extraction for
reasons of stability, some
require nonextraction, and a
large group in the middle could
have satisfactory outcomes
with either approach.


www.indiandentalacademy.com
Satisfactory occlusal
function for the great
majority of patients, including
consideration of TMD, has little
to do with the presence or
absence of premolars.


A few patients would require
extraction or nonextraction
treatment for occlusal reasons,
but for almost all, either
approach is satisfactory from
an occlusion point of view.


www.indiandentalacademy.com
How much dental arch dimensions can be
permanently changed by orthodontic
treatment ?

If the limits are tightly set by genetic
control, then long-term expansion is
unlikely to be successful.

Hence, tooth size jaw size ratios would be
a major diagnostic criterion.

www.indiandentalacademy.com
On the other hand if arch dimensions are greatly
influenced by environment as Angle believed,
then major changes should be possible.

This view has reappeared in recent years
supported by studies that show little genetic
determination of occlusal variations. (Corrucini,
Sharma , Potter, 1986).

www.indiandentalacademy.com
It is difficult to know how much change is
possible regarding arch width, but a
strong possibility of arch expansion
certainly encourages attempts of
nonextraction treatment.

www.indiandentalacademy.com
Arch width changes with age
There are clinically significant differences
in the magnitude and manner of width
changes in the maxilla and mandible.

Dental arch width increases correlate with
vertical Alveolar process growth, whose
direction is different in the upper than in
the lower arch.
www.indiandentalacademy.com
Maxillary alveolar processes diverge while
the mandibular alveolar processes are
more parallel.

As a direct result, maxillary width increases
more than mandibular arch due to vertical
alveolar development , a important clinical
point.

www.indiandentalacademy.com
The maxillary permanent cuspids are
placed further distally in the arch than their
primary counterpart and erupt pointing
mesially and labially.

Hence their arrival is another important
factor contributing to expansion of
maxillary dental arch.


www.indiandentalacademy.com
The intercanine diameter
increases only slightly
in the mandible, and
some of this increase is
the result of the distal
tipping of the primary
cuspids into the primate
space, since the
mandibular incisors are
not normally moved
labially through time.

www.indiandentalacademy.com
Furthermore, dental arch width changes
are closely related to the events of dental
development rather than endocrinally
mediated events of overall skeletal growth
such as the adolescent spurt in stature.
www.indiandentalacademy.com
Bicanine width
increments versus
dental age
age. 0 = moment of
arrival of first
permanent incisor.
www.indiandentalacademy.com
Need for arch expansion
To correct lateral Malrelationships of
Dental Arches
Failure of the two dental arches to occlude
normally in lateral relationship, known as
lateral or posterior crossbite, may be due
to localized problems of tooth position or
alveolar growth, or to gross disharmony
between maxilla and mandible.
www.indiandentalacademy.com
Dentoalveolar
crossbite with good
apical base width
(left) and crossbite
with a deficient apical
base width (right).

www.indiandentalacademy.com
Lack of harmony between the maxillary
and mandibular widths usually is due to a
bilateral constriction of maxilla.

In such cases, the muscles shift the
mandible to one side to acquire sufficient
occlusal contact for mastication, causing
unilateral crossbite though the constriction
is bilateral.
www.indiandentalacademy.com
www.indiandentalacademy.com
Rarely, there may be true unilateral
crossbite due to asymmetric lateral growth
of maxilla e.g in case of hemifacial
microsomia.
www.indiandentalacademy.com
A more severe
condition is that in
which the mandibular
denture occludes
completely within the
maxillary arch
www.indiandentalacademy.com
When lateral problem is combined with a
skeletal Class II / Class III malocclusion,
lateral discrepancy get exaggerated
because of antero-posterior morphology of
mandible.

www.indiandentalacademy.com
The effect of anteroposterior position of the arches on
buccal overjet is shown when a normal occlusion (B) is
shifted to a Class II molar position (A) that increases
buccal overjet and to a Class III molar position (C) that
decreases buccal overjet.

www.indiandentalacademy.com
Dimensional Changes possible
with Orthodontic Therapy



It is relatively simple to increase the
maxillary dental arch width and length, but
difficult to increase and retain the
mandibular dental arch width.
www.indiandentalacademy.com
www.indiandentalacademy.com
Maxillary expansion
CLASSIFICATION

1 Orthopedic: width of underlying basal bone is increased by means of
splitting mid palatal suture.
Orthopedic expansion may be rapid or slow depending on rate of
expansion.

2. Orthodontic: Expansion produced by conventional fixed appliances
or removable expansion plates. The crowns of involved teeth are
tipped buccally with resultant lingual tipping of roots. Resistance of
muscular envelope may lead to relapse.

3. Passive: When the muscle forces (buccal & labial) are shielded away
from the dentition, a widening of dental arches occurs. This
expansion is a result of intrinsic forces produced by tongue.
Ex. F.R. Appliance, Lip Bumper
www.indiandentalacademy.com
Rapid maxillary expansion
HISTORICAL BACKGROUND

The problems associated with a narrow maxilla
and the need for expansion has been
recognized since long time.

In 1860, E.C. Angell successfully splitted maxilla
using a jack screw appliance. He is considered
the father of rapid maxillary expansion.
However his work failed to gain popularity in the
orthodontic community.


www.indiandentalacademy.com
In 1877, Walter coffin introduced coffin spring for arch
expansion. This spring was believed to cause separation
of the mid palatal suture in young children.

Farrar (1888) and Clark C. Godard (1893) also
discussed the feasibility of lateral expansion with mid
palatal suture opening.

Around beginning of 20
th
century, ENT surgeons showed
interest in this technique of orthopedic expansion of
maxilla.


www.indiandentalacademy.com
EyselL, a rhinologist believed that rapid
expansion could bring about a change in nasal
configuration and airflow.

Wright in 1912 reported a 6.5mm widening of
nasal cavity with rapid maxillary expansion.

During early 1970s, Hass started using rapid
maxillary expansion extensively.

www.indiandentalacademy.com
HAAS (1980) evaluated the stability of maxillary
expansion achieved with rapid palatal
expansion.

He wrote totally stable 4 and 5mm intercanine
expansions in the lower arch many years out of
retention. and upper buccal teeth expanded 9
to 12mm with the expansion remaining
absolutely stable.


www.indiandentalacademy.com
Mid palatal suture

Latham (1971) believed that growth at the
midpalatal suture ceases at the age of 3 years.

By means of implants, Bjrk and Skieller (1974)
found that growth at the suture might be
occurring as late as 13 years of age.


www.indiandentalacademy.com
Persson and Thilander (1977) in a study on
cadavers found that 5% of the suture was
obliterated by age 25 years, yet the variation
was such that a 15-year-old cadaver had an
ossified suture, while a 27-year-old cadaver had
an unossified suture.

Epker and Wolford (1980) stated, In patients
over the age of 16 years, attempted orthopedic
rapid maxillary expansion is frequently
associated with significant difficulties.

www.indiandentalacademy.com
Difficulty is usually the resultant fusion of various
craniofacial sutures, which results in a lack of suture
opening on expansion.
Most important effect is produced by zygomatic buttress
which resist lateral movements of two maxillae.

The optimal age for expansion is, therefore, before 13 to 15
years of age.

Although it may be possible to accomplish expansion in
older patients, the results are neither as predictable nor
as stable.

www.indiandentalacademy.com
INDICATIONS FOR R.M.E
According to Haas, the following five conditions
are recognized to be primary indications for
RME:
1. Transverse maxillary discrepancy resulting in
posterior cross bite.
2. A-P maxillary deficiency cases with negative
ANB that would benefit from maxillary
protraction. In such cases RME is required to
loosen the maxilla.

www.indiandentalacademy.com
3. Cleft palate cases with collapsed maxilla.

4. Cases of nasal stenosis characterized by
mouth breathing & constricted nasal
aperture.

5. Moderate arch length problems in patients
of 14-16 yrs age.

www.indiandentalacademy.com
CONTRAINDICATIONS
1. Periodontally compromised dentition
2. Single tooth cross bite
3. Ossification of suture is completed
4. Poor patient co-operation
www.indiandentalacademy.com
APPLIANCES USED FOR EXPANSION

Removable appliance removable plate with jack screw

Fixed appliances:
Fixed tooth & tissue borne appliances
- Derischsweiler type
- Haas type
Fixed tooth borne appliances
- Isaacson type
- Hyrax appliance


www.indiandentalacademy.com
Removable plates

These appliances usually consist
of an expansion jack screw with
palatal coverage & claps for
retention of appliance.

They are general advocated
during deciduous / early mixed
dentition to bring about desired
skeletal changes.

Retention during expansion
procedure is difficult as they
easily get dislodged. Patient co-
operation is essential.

www.indiandentalacademy.com
Derischsweiler expander

In this type of expansion
device, the screw is
embedded in acrylic which
covers the palatal vault &
alveolar ridges. The first
premolars & molars are
banded.
Wire tags soldered to the
palatal aspect of the bands to
facilitate attachment of acrylic.
The acrylic extends to the
palatal aspect of all non
banded teeth except incisors.

www.indiandentalacademy.com
Haas expander

The first premolars & first molars are banded.

1.2 mm diameter stainless steel wire is soldered
onto the buccal & palatal surfaces of these
bands connecting the premolar to the molar.

Disadvantage of Hass type expander is pressure
necrosis of palatal mucosa under acrylic


www.indiandentalacademy.com
The lingual bar is over
extended anteriorly and
posteriorly and is bent
palatally to aid in
attachment to palatal
acrylic.
A midline screw is
incorporated in the split
acrylic base plate.
The acrylic falls short of
the rugae anteriorly and
lingual gingival areas.

Haas type expander
www.indiandentalacademy.com
FIXED TOOTH BORNE APPLIANCES

Isaacson type:
This appliance uses a special spring loaded
screw called Minne expander.

The Minne expander is soldered on to the metal
flanges running from banded first premolar and
first molar.

www.indiandentalacademy.com

Spring is activated by
turning the adjustment
screw, thereby
compressing the coil
spring.

Disadvantage of minne
expander is poor oral
hygiene.

Minne expander
www.indiandentalacademy.com
Hyrax appliance.
(hygienic rapid
palatal expander)

A fixed wire appliance
cemented to the first
permanent molars and
first premolars with
centrally located
jackscrew.


Banded Hyrax
www.indiandentalacademy.com
Tooth extrusion, dental tipping, and an
increase in the vertical dimension are
often encountered with expansion
appliances.

Bonded Hyrax using interocclusal acrylic
may control the vertical dimension and
expand the maxillary halves in a more
bodily and symmetrical fashion.

www.indiandentalacademy.com
A. Hyrax appliance design.
B. Bonded Hyrax design.


www.indiandentalacademy.com
In one study (Steven Asanza, George J. Cisneros, Lewis
G. Nieberg. 1997) , the results suggest that :
1. The bonded RME appliance displayed less inferior
movement of the posterior aspect of the palate as
measured by SN-PNS in mm.
2. The bonded appliance showed less anterior
displacement of the maxilla than the Hyrax appliance as
measured by S-A pt. in mm.
3. The Hyrax appliance showed a greater increase in
vertical facial height as measured by ANS-Me in mm.
4. Both appliances resulted in tipping of the posterior teeth,
which was highly variable and asymmetric.


www.indiandentalacademy.com
Expansion screw
A typical screw consists of an oblong body
divided into two halves, each half has a
threaded inner side to receive one end of a
double ended screw.
The screw has a central bossing that has four
holes. These holes receive a key to activate the
screw.
A single adjustment of the screw brings about
1/4 revolution causing 0.18mm linear
movement.


www.indiandentalacademy.com
www.indiandentalacademy.com
ACTIVATION SCHEDULE

Zimring & Isaacson:
In young growing patients, two turns each day for 4-5 days and later
one turn per day till desired expansion is achieved.

In adults (non growing patients) two turns each day for first two
days, one turn per day for the next 5-7 days and one turn every
other day till desired expansion is achieved.

Timms:
1. Up to 15 yrs : 90 rotation once in the morning & once in the
evening

2. 15-20 yrs : 45 activation 4 times a day

www.indiandentalacademy.com
Period of retention:
The objective is to maintain the expansion
achieved while all forces generated during the
procedure have decayed.
Hass : Recommends 2 yrs of full time retention
followed by 1/1/2 - 2 years of part time retention.

Isaacson :Use RME appliance for retention. The
screw is immobilized with acrylic.

www.indiandentalacademy.com
Chaconas and Caputo (1982) compared these
expansion appliances with respect to force
delivered and change in width of appliance.

The Haas and Hyrax appliances delivered very
high orthopedic forces that were similar.


www.indiandentalacademy.com
The removable appliance, when fully and
firmly seated, delivered the highest force
of all appliances tested.

When unstable, however, the removable
appliance was only capable of much lower
forces, similar to those of the Minne-
expander.

www.indiandentalacademy.com
www.indiandentalacademy.com
Pattern of stresses produced
during RME
Stresses produced by
appliances are
concentrated in the
anterior and posterior
regions of the palate.
Darker shading represents
areas of higher stress.


www.indiandentalacademy.com
Stresses radiate from
the junction of the
palatine bones to
deeper structures via
the perpendicular
plates of the palatine
bone.
Darker shading represents
areas of higher stress.


www.indiandentalacademy.com
Stresses radiate from
the maxillary
tuberosity to the base
of the medial
pterygoid plate.
Darker shading represents
areas of higher stress.


www.indiandentalacademy.com
Concentration of
stresses at the
zygomatico-temporal
suture.
Darker shading represents
areas of higher stress.


www.indiandentalacademy.com
Concentration of
stresses at the
junction of the nasal
and lacrymal bones.
Darker shading represents
areas of higher stress.


www.indiandentalacademy.com
Displacement of various structures
during RME
Movement of Maxillary teeth
Anteriors : Appearance of space between
the maxillary central incisors is the earliest
clinical evidence that midpalatal split is
occurring.

It is estimated that the incisors separate
approximately half the distance the screw
is opened (Haas).

www.indiandentalacademy.com
Clinical features
X-ray picture before expansion, after
expansion, and three months later.

www.indiandentalacademy.com
Posteriors:

Initial bending of alveolar process & compression
of periodontal ligament is accompanied by
change in long axis of posterior teeth (buccal
tipping).

This is also partly due to the tipping of teeth in
the alveolar bone and partly because of
extrusion of maxillary posteriors.

www.indiandentalacademy.com
Direction of palatal split

In the frontal view, the suture separates in a
triangular fashion with base towards the oral
cavity & apex towards nasal cavity.

From occlusal view, the split occurs in a wedge
shaped manner with maxilla opening anteriorly.
This resembles the opening of a fan evident on
an occlusal radiograph.

www.indiandentalacademy.com
A. Triangular pattern of maxillary expansion in
the frontal plane includes orthopedic and
orthodontic movement. Orthopedic changes
may involve separation at sutural sites with a
lateral rotation or tipping of the palatal
halves, widening of the nasal processes, and
subsequent bony remodeling. Orthodontic
changes may involve lateral tipping and
bodily translation of maxillary teeth, transient
midline diastema, and mild expansion of
mandibular teeth.

B, Occlusal view of maxillary expansion
illustrating midpalatal suture opening with
greatest separation occurring anteriorly,
lateral rotation of palatal halves, bony
remodeling of maxillary elements, and
lateral/rotational movement of the maxillary
teeth.


www.indiandentalacademy.com
Effect on alveolar bone

The alveolar process being resilient, RME forces
initially leads to its lateral bending. This is due to
the arcing of the bones themselves and some
amount of lateral tipping of teeth.

Walters, however contradicted these findings
and reported a lateral & upward rotation of the
maxilla itself.

www.indiandentalacademy.com

Effect on Palatal vault

Haas & Krebs reported lowering of the palatine
process due to outward tilting of the alveolar
processes.
This contributes partly in straightening of DNS
(Korkhaus), widening of nasal floor & flattening
of palatal vault.



www.indiandentalacademy.com
Effect on palatal mucoperiosteum &
PDL tissues.

As the maxillary halves separate, the
palatal mucoperiosteum is stretched.
During the post-expansion period, recoil of
the stretched fibers causes a decrease in
the inter-molar angulation.
www.indiandentalacademy.com
Surgically Assisted Rapid Palatal
Expansion


Surgically assisted palatal expansion is an
method of reducing the resistance of
ossified midpalatal suture to facilitate
expansion by mechanical procedures.

www.indiandentalacademy.com
Surgical Procedure
A paramedian incision is made under local
anesthesia.
After the mucoperiosteum is released,
midpalatal suture is separated with a
midline cut, about 3mm deep but not
reaching the foramen incisivum.
The mucosal and bony cuts should not
overlap.
www.indiandentalacademy.com
Surgical procedure:
Mucosal (solid
line) and bony
(dashed line) cuts
on palate (A) and
lateral maxillary
buttress (B).


www.indiandentalacademy.com
Two bony cuts each about 4mm long, are
then made on each side of the lateral
maxillary buttress above the root apices
and parallel to the occlusal plane.

www.indiandentalacademy.com
After the osteotomy, the maxillary segments are not fully
detached, but can be separated by rapid expansion with
a jackscrew appliance.

The expansion appliance should be cemented in place
before surgery and activated three or four quarter-turns
by the surgeon after the bony cuts are made.

The rest of the expansion is achieved in daily increments
for about two weeks after surgery. Overcorrection of
about 2.5mm per side (5mm total) is usually advisable.

www.indiandentalacademy.com
Modular Palatal Disjunctor Appliance
(Jean-luc pruvost, 1989)

Development of a modular, easily
removable palatal expander was
prompted by the need for increased
precision and working comfort during
maxillary surgery.



www.indiandentalacademy.com
The appliance is made of cast, etchable
nickel chromium, which has a high
resistance to breakage and torsion.

The three parts of the appliance can be
joined by Allen screws.


www.indiandentalacademy.com
www.indiandentalacademy.com
Rapid Maxillary Expansion in Cleft Lip
and Palate Patients

Because of their tendency toward skeletal
segmental collapse, bilateral complete cleft lip
and palate patients often require rapid maxillary
expansion.

As in normal individuals, the pattern of
expansion is triangular with a greater opening in
the anterior region


www.indiandentalacademy.com
In cleft patients, however, the separation
occurs in the suture between the maxilla
and the premaxilla, with no osseous gain.

The increase in maxillary arch width and
the orthopedic effect can correct the
transverse maxillomandibular relationship.
www.indiandentalacademy.com

In growing cleft palate individuals, the
opening of the sutures can displace the
maxilla forward and downward, opening
the bite and moving Point A anteriorly.

In most instances, however, these effects
are only temporary.

www.indiandentalacademy.com
Activation schedule in cleft patients

The appliance is first activated with four quarter-turns 24
hours after placement.

For the next four days, the screw is activated two quarter-
turns in the morning and two quarter-turns in the
evening.

At this point, the orthopedic force should be sufficient,
and activation can be reduced to a more comfortable
one quarter-turn in the morning and one in the evening.

www.indiandentalacademy.com
The average activation period is from one
to two weeks, depending on the degree of
maxillary constriction and the resistance of
the patient's maxillofacial structures.

A 2-3mm overcorrection at the molars is
recommended to counteract a relapse that
has been reported to reach 30-50%, or
even 75% at the canines.
www.indiandentalacademy.com

A. Upper arch before expansion. B. Haas-
type expander in place.


www.indiandentalacademy.com


After full expansion
www.indiandentalacademy.com
Once the desired expansion is obtained, the
screw is immobilized by acrylic.

The appliance is kept in place for three months
of retention, which further reduces the possibility
of relapse.

The expander is then removed, and impressions
are taken.

www.indiandentalacademy.com
A removable palatal plate, without clasps
that might interfere with any remaining
orthodontic movement or with proper
tongue position, is worn as a retainer until
the end of treatment.

www.indiandentalacademy.com
Nickel Titanium Expander
Unlike normal patients, one has to be very
careful regarding force level in cleft patients.

A tandem-loop, nickel titanium, temperature-
activated palatal expander with the ability to
produce light, continuous pressure is very useful
tool for arch expansion in cleft patients.

www.indiandentalacademy.com
A Degree of
compression when
prototype appliance
was chilled to 20
below transition
temperature.
B. Effect of shape
memory when
appliance was
warmed to body
temperature.


www.indiandentalacademy.com
This fixed-removable appliance has
adjustable stainless steel extensions and
is inserted into standard horizontal lingual
sheaths that are spot-welded to the molar
bands.

A locking indent on the lingual attachment
securely fastens the expander to the molar
band to ensure patient safety.
www.indiandentalacademy.com
www.indiandentalacademy.com
A. Passive appliance.
B. Initial activation and
insertion for
expansion and distal
molar rotation.
C. After expansion and
rotation correction.


www.indiandentalacademy.com
SLOW MAXILLARY EXPANSION
Initially, RME was believed to cause more
skeletal than dental expansion.
However, when the expansion is
completed and bone is filling in the defect,
orthodontic tooth movement continues
causing skeletal relapse.
Hence although total expansion is
maintained, the % due to tooth movement
increases & skeletal expansion decreases.
www.indiandentalacademy.com
With slow expansion, the total expansion is
half dental/half skeletal from beginning.
The final outcome of rapid versus slow
expansion at 10weeks is similar.


www.indiandentalacademy.com
The rate of expansion in slow expansion is
1 mm per week compared to about 1 mm
per day with RME.

Slow expansion is achieved by activating a
spring to give 2-4 Ibs of force in contrast to
about 10 lbs force with RME.
www.indiandentalacademy.com
Quad-helix
Quad-helix or W expansion appliance was
popularized by Ricketts. Depending on age of
patient, quad helix can produce dento-skeletal
(SME) or dental effects.

It is fabricated from .040" blue Elgiloy wire and is
either soldered to the upper first molar or bent to
fit into a lingual sheath. The lingual arm of the
appliance extends to the premolar or cuspid.
www.indiandentalacademy.com
The posterior helix is
beveled slightly to lay
against the palatal vault
and is as close to the
upper molar as possible
to prevent impingement
on the palatopharyngeus
muscle.
The anterior helices are
brought as far forward as
possible.

www.indiandentalacademy.com
The anterior segment of the W expansion
should be as wide as possible so that the
appliance is maintained away from the
swallowing position of the tongue.

All of the helices should roll to the top and
should be tightly wound to increase their
mechanical efficiency

www.indiandentalacademy.com
Initial activation of quad-helix appliance
during insertion.


In Class II cases, most of
the arch form change
should occur in the
anterior portion of the
buccal segments.

As the upper molars are
expanded approximately
1cm per side, the anterior
segments are expanded
approximately 3cm
overall.



www.indiandentalacademy.com
Intra-oral activation of quad-
helix appliance.

When an intraoral bend is
made in the anterior segment
to increase the amount of
overall expansion, a reciprocal
bend must be made in the
posterior section in order to
compensate for the tendency
for mesial rotation of the upper
molars.

Therefore, three intraoral
adjustment bends are usually
made at each activation.




www.indiandentalacademy.com
Modifications of the quad-helix
appliance.


www.indiandentalacademy.com
Schwarz Appliance:

The appliance basically
consists of an acrylic plate
with a midline split
incorporating one / two
expansion screws, the
acrylic does not cap the
occlusal surface / incisal
edges.

The appliance in addition
has a labial bow & is
retained by means of
Adam's / ball end clasps.

www.indiandentalacademy.com
Y plate:
The acrylic sectioning is
done in a Y shape. The
appliance incorporates
two screws on each side.

The incisor segment is
expanded anteriorly
whereas the posterior
segment moves laterally

www.indiandentalacademy.com
Coffin spring (Walter
coffin 1877)
Removable appliance
incorporating omega shaped
loop.

The appliance is retained by
means of Adam's clasps. The
free ends of the spring as well
as retentive arms of clasps are
acrylised.

Activation is done by using
three pliers.
www.indiandentalacademy.com
Porter lingual archwire.

This appliance is usually used for
correction of posterior crossbite in the
primary dentition.
www.indiandentalacademy.com
www.indiandentalacademy.com


Mandibular expansion
www.indiandentalacademy.com
Historical background

Lack of adequate space in the mandibular
arch is often a critical factor in the decision
of whether to extract teeth or not.

In this regard, expansion of the mandibular
arch has gained interest in non-extraction
treatment
www.indiandentalacademy.com
Reidel (1952) stated that arch form,
particularly in the mandibular arch, could
not be altered by appliance therapy.
Intercanine and intermolar widths
tend to decrease during the post-retention
period, especially when expanded during
treatment
www.indiandentalacademy.com
In one study (Housley, Dale, Ram S.
Nanda, Frans Currier, 2003), only 8% of
the arch width increase at the canines was
maintained after retention, but, at the
premolars and the first molars area, about
60% to 70% of the expansion remained
stable.
www.indiandentalacademy.com

Haas (1970), using a midpalatal suture-
opening appliance without any treatment in
the lower arch, observed that the
mandibular arch tended to follow the
maxillary teeth by tipping laterally.
www.indiandentalacademy.com
He claimed that mandibular intercanine
width can be increased in the non growing
individuals if the apical base of the
maxillary complex is permanently
widened.

www.indiandentalacademy.com
According to Sandstrom, Klapper, and
Papaconst (1998), this stability of the
expanded mandibular arch width may be
the result of an altered muscular balance
exerted on the dentition by the buccinator
muscles, which have been carried laterally
by the maxillary expansion.

www.indiandentalacademy.com
Gardner (1978) has shown that the
cuspids are the greatest limiting factor in
arch expansion, but the very adjacent
tooth i.e first premolars offered great
opportunity for expansion regarding
stability.
www.indiandentalacademy.com
Lestrel (1978) proposed a formula
determining the ideal dimension of the
lower arch at the distal contact of the
cuspids.
The formula is as follows:

www.indiandentalacademy.com
incisor mass: sum of mesio-distal
diameters of the four lower incisors
mandibular width: the distance between
the left and right antegonial notches.
Frankfort mandibular plane angle.
facial angle: Angle between facial plane
and Frankfort plane.

www.indiandentalacademy.com
norms
www.indiandentalacademy.com
The formula shows that a patient with a
brachyfacial pattern (wide mandible + low
mandibular plane angle) will have a wider
mandibular arch than the dolichofacial
pattern (narrow mandible and a high
mandibular plane angle)
www.indiandentalacademy.com
Therefore under certain circumstances,
expansion of lower arch is possible.

Till recently before the introduction of
distraction osteogenesis technique, it was
impossible to widen mandibular basal
dimensions.
www.indiandentalacademy.com
Mandibular expansion appliances
Mandibular Schwarz appliance

The original mandibular Schwarz appliance
retained with ball end clasp is effective in
dentoalveolar expansion, but often
retention is problem.
www.indiandentalacademy.com
Traditional mandibular
Schwarz appliance
with ball clasps for
retention.


www.indiandentalacademy.com
Whether Adams clasps, C clasps, or ball
clasps are used as the primary method of
retention, the appliance is unstable
because the clasps do not fit well in the
undercuts of the lower deciduous molars.

www.indiandentalacademy.com
Warren Hamula (1993)
modified Mandibular
Schwarz Appliance to
increase both
retention and strength
of appliance by
means of wire
reinforment. Posterior framework of .028"
round wire.

www.indiandentalacademy.com
Modified mandibular
Schwarz appliance.




www.indiandentalacademy.com
Buccal Shield Appliances for Mandibular Arch
Expansion

- The lip bumper
- Frankel's buccal shields


These appliances are most effective for increasing the
arch width during the eruptive phase of dentition.


www.indiandentalacademy.com
Lip bumpers

The lip bumpers are made
of malleable, 0.040"
stainless steel wire with
posterior adjustment
bends to allow
anteroposterior
adjustments.

About 3mm of clearance is
recommended between
the bumper and the teeth
to allow proper lip contact
with minimum discomfort.

www.indiandentalacademy.com
A.Displacement of buccal
mucosa by typical lip
bumper.

B,C. Buccal mucosa may
roll over or under wire,
preventing arch
expansion by contacting
teeth.

Hence for arch
expansion, vestibular
appliances are better




www.indiandentalacademy.com
This problem of limited shielding effect by
lip bumper wire does not happen with
buccal shields of Frankel appliance.
www.indiandentalacademy.com
The functional matrix and
the Frnkel appliance
OO, Obicularis oris.
B, Buccinator.
PMR, Pterygomandibular raphe.
SPC, Superior pharyngis constrictor.
LP, Labial pad.
VS, Vestibular shield.

The functional regulator provides a
larger functional matrix than the
teeth. The buccinator mechanism
will grow and adapt to whichever
functional matrix (soft-tissue
capsule) is present in the mouth.

This adaptation occurs primarily
during growth. After growth is
complete, very little, if any,
change can be expected.


www.indiandentalacademy.com
Schematic view of the influence of vestibular
shields on eruptive path and dentoalveolar
development.


Dense stippling shows
alveolar apposition
prompted by the
vestibular shield, whereas
lighter stippling shows the
more lateral position of
the permanent tooth.

www.indiandentalacademy.com
The vestibular shield
creates tension at the
depth of the mucobuccal
fold in a lateral direction.
This tension is directed at
influencing the erupting
permanent teeth to erupt
further laterally than
normal, thereby resulting
in arch expansion.

Notice that less
influence is seen on
fully erupted teeth, as
shown by the open
arrow.
www.indiandentalacademy.com
Distraction osteogenesis

Distraction osteogenesis (DO), originally
developed by Russian orthopedic surgeon
Ilizarov, has produced significant results in limb
lengthening.

Mandibular symphyseal DO introduced by
Guerrero, provided a new paradigm for
increasing transverse dimension of mandible,
which once thought to be impossible.

www.indiandentalacademy.com
www.indiandentalacademy.com
www.indiandentalacademy.com
Distraction protocol

A latency period is critical for DO. Without
allowing time for a callus to form, callus
manipulation cannot occur.

Without a good callus, the quality of the
regenerate bone can be adversely affected,
possibly creating bone of poor quality and other
complications.


www.indiandentalacademy.com
The latency period is typically seven days.

In young children, healing is accelerated,
and may require a shorter latency period.

Older patients may require a slightly
increased latency period because of a
slower rate of healing.

www.indiandentalacademy.com
The rhythm of distraction refers to the
number of increments required to reach
the preplanned daily rate of distraction.
The rate of 1mm/day can be performed all
at once or in various smaller increments.

A clinically efficient rhythm has been 0.25
mm four times a day or 0.50 mm twice a
day.


www.indiandentalacademy.com
Post DO retention
A fixed lower canine-to-canine wire will
adequately maintain the canine width and
anterior alignment, but cannot be expected to
aid in maintaining any posterior expansion.

Consequently, a Hawley retainer with integral
lingual support wire is a good form of mandibular
retention.

www.indiandentalacademy.com
Conclusion
There is clear reversal swing of pendulum
towards non extraction treatment modality.

Most of the borderline cases which once
were considered for extraction are now
being attempted through non extraction
approach with required space being
provided by arch expansion.
www.indiandentalacademy.com
www.indiandentalacademy.com
Leader in continuing dental education
www.indiandentalacademy.com

You might also like