Professional Documents
Culture Documents
VOT/GEP
Statistics Analysis
Problem Finding
01/17/15
Motorola Internal Us
Preparation (1)
Definition File
Without it, it is impossible to observe overshooing neighbors
GenDef7.exe can convert FP to definition file
Neighbor list
with definition
file
01/17/15
Neighbor list
without definition
file
Motorola Internal Us
Preparation (2)
01/17/15
Motorola Internal Us
Drive Test
For Benchmark
2 minutes per call
10 15 minutes a log files
Force to appropriate band (GSM only, DCS
only or Dual)
Motorola Internal Us
TEMS Introduction
Interface
Functions
01/17/15
Motorola Internal Us
.CSV
.STA
Much shorter
cycle time by VOT
and GEP.
VOT/GEP
Motorola Internal Us
Undecoded BCCH
BSIC Undecode in Other Site
No Handover
Delay Handover
Ping Pong Handover
Negative Handover
Overshooting
High Overlapping
No Dominant Server
01/17/15
Poor Coverage
Unreasonable Serving Area
Interference
Handover Failure
Handover Loss
UL Drop
Drop Call
Sudden Power Drop
MS Power Rapid Increase
Motorola Internal Us
Reason:
GCLK shift, only decode same site BSICs
Channel interference
Non-BCCH carrier, no dedicated spectrum for
BCCH
01/17/15
Motorola Internal Us
01/17/15
Motorola Internal Us
10
Reason:
GCLK shift
GCLK recalibration is required
No one monitors OMC-R alarms
01/17/15
Motorola Internal Us
11
No Handover (1)
Description:
Neighbor BSIC is decoded and COMMON handover requirement is fulfilled but
there is never a handover
Reason:
Missing neighbor
No such neighbor in CM database
01/17/15
Motorola Internal Us
12
No Handover (2)
01/17/15
Motorola Internal Us
13
Reason:
All possible neighbors suffer blocking
Large hreqt * hreqave
qual_power_flag is enabled, full BTS/MS power must be
reached before handover
Large handover_recognized_period and bssmap_t7
setting
Refer to GSM BSS Statistics Analysis Handbook
01/17/15
Motorola Internal Us
14
01/17/15
Motorola Internal Us
15
Reason:
Motorola Internal Us
16
01/17/15
Motorola Internal Us
17
Reason:
ho_only_max_power is enabled
qual_margin_flag is disabled
ho_margin_usage_flag is enabled with negative
ho_margin_rxqual/rxlev
Negative HO_MARGIN
Micro-cellular algorithms are enabled, especially type 5
01/17/15
Motorola Internal Us
18
-66dBm
after
HO
01/17/15
Motorola Internal Us
19
Overshooting (1)
Description:
Cell shoots at far distance but that location has
closer cells around
Reason:
Motorola Internal Us
20
Overshooting (2)
01/17/15
Motorola Internal Us
21
Reason:
Overshooting
Too many cells in that area
Poor antenna downtilt
01/17/15
Motorola Internal Us
22
-65dBm
-65dBm
01/17/15
Motorola Internal Us
23
Reason:
Poor antenna downtilt
Lack of near-by site
01/17/15
Motorola Internal Us
24
01/17/15
Motorola Internal Us
25
Reason:
01/17/15
Motorola Internal Us
26
01/17/15
Motorola Internal Us
27
Reason:
Wrong cable connection to antennas
Incorrect record of antenna orientation
Incorrect ANTENNA_SELECT
01/17/15
Motorola Internal Us
28
01/17/15
Cell ID:102
Cell ID:103
BCCH: 40
BCCH: 45
Motorola Internal Us
29
Interference (1)
Description:
High rxlevel with rxquality
Reason:
Channel interference
Not using dominant server
No handover
Turn the corner with delay handover
01/17/15
Motorola Internal Us
30
Interference (2)
01/17/15
Motorola Internal Us
31
Reason:
Channel interference
Poor coverage
External interference at UL, like wideband repeator
Refer to GSM BSS Statistics Analysis Handbook
01/17/15
Motorola Internal Us
32
01/17/15
Motorola Internal Us
33
Reason:
Channel interference
Poor coverage
External interference at UL, like wideband repeator
Refer to GSM BSS Statistics Analysis Handbook
01/17/15
Motorola Internal Us
34
01/17/15
Motorola Internal Us
35
UL Drop (1)
Description:
BSS doesnt receive UL SACCH for link_fail times
BSS stops transmitting DL power
Reason:
External interference
Channel interference
Faulty ancillary. UL path loss >>> DL path loss
Refer to GSM BSS Statistics Analysis Handbook
01/17/15
Motorola Internal Us
36
UL Drop (2)
01/17/15
Motorola Internal Us
37
Reason:
All cases in this presentation
Refer to GSM BSS Statistics Analysis Handbook
01/17/15
Motorola Internal Us
38
01/17/15
Motorola Internal Us
39
Reason:
Motorola Internal Us
40
01/17/15
Motorola Internal Us
41
Reason:
Sudden UL interference, e.g. wideband repeator,
channel interference
Too much rapid power down
l_rxlev_ul_p is too small
01/17/15
Motorola Internal Us
42
UL power rapid
increase from 19 to
5 suddenly
01/17/15
Motorola Internal Us
43
01/17/15
Motorola Internal Us
44
Motorola Internal Us
45
01/17/15
Motorola Internal Us
46
01/17/15
Motorola Internal Us
47