Professional Documents
Culture Documents
Collect data
Select at least one month Sunday(busiest day) busiest-hour cell level traffic
KPI includes: CS traffic(Erl) , PS traffic(Erl) ,current TRX configuration , SDCCH configuration, TCH configuration, TRX
availability
1. There shouldn’t be big operation affecting the traffic too much during the period, or it will affect the data
accuracy.
2. Check the TRX availability : if there are down sites , the traffic will share to other sites around and affect
the traffic distribution. For example: SSWR,TRX availability is 60%~80% at NBH and not stable, so it’s hard
to collect the data we want
3. Channel configuration: if the SD or PD channel too much but TCH not enough ,if may cause TCH
congestions but actually the TRX may be enough for the traffic.
4. Overshooting Issue
Get the max traffic in one month
by excel pivot table , we can calculate the biggest traffic for every cell. There will be some cells’ traffic
calculated higher due to some impact reasons, but we can accept this because the network should support this kind
of impact traffic such as Sep.11 holiday.
Reduce TRX
Q: Which kind of cells can reduce the TRX number?
RF Resource Evaluation
RF Resource
Evaluation
SDCCH
TCH
TRX
PDCH
PCH
In capacity management:
RF Resource Include SDCCH 、TCH、PDCH、PCH Resource.
Based on the estimation of the future traffic growth, the RF Resource to be added to TRX Board are predicted.
SDCCH Resource no need to analyze—SDCCH Dynamic Adjust Function
When PCH Resource is insufficient , it resolved by network optimization not expanding
Calculate for Reducing & expanding TRX numbers
Reducing TRX Method
Three types of cells:
1. If the traffic load is low for both G&D sectors, we can calculate these sectors to decrease the TRX.
2. If the traffic is not balanced between G&D sectors, we need to balance the traffic first.
3. If the traffic is high for both G&D sectors ,can not reduce.
Q: for the second type of cells, can we reduce the TRX?
confirm cancel
Mapinfor can find the frequency more
correctly than U-net. But it needs us to be
careful during the frequency planning and it
needs more time.
TRX configuration
Here we list 3 types of Addis RRU, when configuring the TRX power , we can follow the POWER configuration
as above.
For more RRU type information in regions.
MML
RMV TRX:
1. LIST HOPPING MA GROUP and remember the configuation(for NR , because closing the HOPPING
will reset the hopping parameter, and we need to fall back the setting)
2. CLOSE HOPPING
3. DEA TRX AND Remove TRX
4. OPEN HOPPING and set the GCELL MA group HSN & TSC the same like before.
ADD TRX:
1. ADD frequency;
2. Close HOPPING;
3. ADD GTRX(TRX-name, TRX ID, Frequency, TRX-No., TRX Group)
4. SET TRX channel types;
5. ACT TRX
6. OPEN HOPPING