Professional Documents
Culture Documents
Course Objectives
Know about packet transport system and its structure Grasp functions, working principles and applications of ZXCTN 9008 cards Know networking application and configuration of ZXCTN 9008 devices
Course Outline
ZTE PTN Products Family
Features of ZXCTN 9008 Multi-Service Unified Carrier Platform, Meeting Development of Full Services Advanced Timing Processing Capability, Meeting Accurate Synchronization Demand Perfect Point-to-Point QoS Solution, Providing Refined Differential Services Powerful Hierarchical OAM Function, Improving Network Availability Multi-Protection Mechanism, Ensuring Network Security Sound Compatibility, Supporting High-Speed Development of Service Network Unified NM System, Simplifying Operation and Maintenance Intelligent Power Consumption Regulation, Saving Resources
System Applications
ZXCTN 9008 provides access and transmission of packet service and is compatible with access and transmission of Time Division Multiplex (TDM) service. System also provides perfect service protection, OAM and clock synchronization and has carrier-class service transmission characteristics.
Course Outline
ZTE PTN Products Family ZXCTN 9008 Overview
Hardware Structure
Software Structure System Functions Boards Networking Application and Configuration
Cabinet
Cabinet Dimensions:
Subrack
1 1 1 1 1 1
1 1 1 1 1
1. LCD 2. Fan Plug-in Box 3. Cabling Trough 4. Service Card Section 5. Main Control Board Section 6. Switch Fabric Card Section 7. Filtering Mesh 8. Air Inlet 9. Power Module 10. Handle
1 1
System Components
ZXCTN 9008 adopts rack design and hardware architecture of the entire system is composed of backplane, main board, switch fabric card, service card, intelligent platform management sub-system, power module, fan and so on.
Course Outline
ZTE PTN Products Family ZXCTN 9008 Overview Hardware Structure
Software Structure
System Functions Boards Networking Application and Configuration
NM Software
Description This is management communication channel interface, used for communication between NE's and conforming to TCP/IP protocol. This is system basic configuration interface, used for initialization configuration, daily maintenance and fault handling. The interface conforms to RS232 asynchronous serial interface protocol. This is an assistant management interface, supporting to implement remote network management through Modem. This is a 10/100 Mbps Ethernet NM interface.
CON Interface
AUX Interface
MGT Interface
Course Outline
ZTE PTN Products Family ZXCTN 9008 Overview Hardware Structure Software Structure
System Functions
Board Networking Application and Configuration
Service Types
Signal Format/Applicable Standard
E-LINE Service IEEE 802.3 and MEF MEF2/MEF4 E-LAN Service E-TREE Service
RFC4717, RFC4816, AF-PHY-0086.001 and CES ITU-T I.363 , B-ISDN, AAL1 standard, AF-VTOA-0078 and CES.
Interface
Ethernet
Interface
STM-N
STM-4 STM-1 POS STM-64 POS STM-16 POS STM-4 POS STM-1 ATM STM-1
Management & Switching Card for 9008 Switching Card for 9008 24-port Gigabit Ethernet SFP Interface Line Card (supporting SyncE) 24port Gigabit Ethernet RJ45 Interface Line Card (supporting SyncE) 48-port Gigabit Ethernet SFP Interface Line Card (supporting SyncE) 48-port Gigabit Ethernet RJ45 Interface Line Card (supporting SyncE) 24-port Gigabit Ethernet SFP Interface and 2-port 10Giga Ethernet XFP Interface Line Card (supporting SyncE)
2-port 10Gigabit Ethernet XFP Interface Line Card (supporting SyncE) 4-port 10Gigabit Ethernet XFP Interface Line Card (supporting SyncE) Multi-service Mother Board with 2 sub Card slot) 1-port OC-192c XFP Interface POS Sub Card 8-port OC-12c/OC-3c configurable SFP Interface POS Sub Card Power DC board for 9008 Power AC board for 9008 Fan board for 9008
configuration is recommended. 11# and 12# 2 switch fabric cards and 2 switching modules on main control board together compose 4 switching plane and provide 3+1 load balancing and redundancy protection. 13#~15# 13#~15# Supporting 1 2 redundancy. The redundancy configuration is recommended. Supporting 1 1 redundancy. The redundancy configuration is recommended. -
Power Module
PM-AC2U PM-DC2UA
1 1
Fan Module
M9008-FAN
16#~17#
P90S1-LPCA P90S1-LPCA
P9008-MSC
1. Fixed Screw 2. Debugging Port CONSOLE 3. Ethernet Management Interface MANAGEMENT 4. AUX Management Interface 5. Board Reset Button RST 6. Board Master/Slave Switchover Button EXCH 7. Board Copy Button CPY 8. SD Card Read-Write Indicator ACT 9. SD Card Interface 10. USB Interface 11. Board Master Status Indicator MST 12. Board Slave Status Indicator SLA 13. Running Status Indicator of Power Module PWR1~3 14. Running Status Indicator of Switch Fabric Card SFC1~2 15. Running Status Indicator of Service Card LIC1~8 16. Lever
1 1 111 1
11 11 1 1 1 11 1 1
1 1
1 1
P9008-MSC
Indicator Status
Indicator Status MST ACT (Green) ALM (Red) RUN (Green) SLV ALM (Red) RUN (Green)
Data is being Constantly ON operated on SD card. Board is in master status. Board is in master status with alarm. Board is in slave status. Board is in slave status with alarm. -
Constantly ON-
Constantly ON
Constantly ON-
P9008-MSC
Indicator Status
PWR1~3 ALM (Red) RUN (Green) Constantly ON Constantly ON Indicator Status SFC1~2 ALM (Red) RUN (Green) LIC1~8 ALM (Red) Constantly ON RUN (Green)
Power board in corresponding Constantly slot reports alarm. ON Switch fabric card in corresponding slot is running normally. Switch fabric card in corresponding slot reports alarm. Service card in corresponding slot is running normally. Service card in corresponding slot reports alarm. -
Constantly ON -
Constantly ON
P9008-SC
1. Fixed Screw
2. Lever
P90S1-24GE-RJ
11
1. Fixed Screw 2. GE Electrical Interface 1~24 3. GE Electrical Interface Working Status Indicator LINK/ACT 4. Lever
P90S1-24GE-SFP
11
1. Fixed Screw 2. GE Optical Interface 1~24 3. GE Optical Interface Working Status Indicator LINK/ACT 4. Lever
P90S1-48GE-RJ
1. Fixed Screw 2. GE Electrical Interface 1~48 3. GE Electrical Interface Working Status Indicator LINK/ACT 4. Lever
P90S1-48GE-SFP
1. Fixed Screw 2. GE Optical Interface 1~48 3. GE Optical Interface Working Status Indicator LINK/ACT 4. Lever
P90S1-2XGE-XFP
11 1
1. Fixed Screw 2. Connection Status Indicator LINK 3. Data Read-Write Indicator ACT 4. 10GE Optical Interface 5. Lever
P90S1-4XGE-XFP
11 1
1. Fixed Screw 2. Connection Status Indicator LINK 3. Data Read-Write Indicator ACT 4. 10GE Optical Interface 5. Lever
P90S1-24GE2XGE-SFPXFP
11
11 1
1. Fixed Screw 2. GE Optical Interface Working Status Indicator LINK/ACT 3. GE Optical Interface 1~24 4. GE Optical Interface Connection Status Indicator LINK 5. 10GEOptical Interface Data Read-Write Indicator ACT 6. 10GE Optical Interface 1~2 7. Lever
P90-1P192-XFP
11
1. POS Interface Connection Status Indicator LINK 2. POS Interface Data Transmission and Reception Indicator ACT 3. 10GE POS Interface
P90-8P12/3-SFP
1 1
1. 155M/622M POS Interface 1~8 2. POS Interface Connection Status Indicator LINK 3. POS Interface Data Transmission and Reception Indicator ACT
PM-DC2UA
1 1
1. Fixed Screw 2. Power Switch 3. -48 V Terminal 4. -48 V RTN Terminal 5. Plug-In Box Handle
PM-AC2U