Professional Documents
Culture Documents
AWS Clasification : E 7016 2,5 3,2 4,0 Ampere : 130 190 Ampere Bahan : Nikko Steel
JOIN DESIGN USED Type : Butt Joint Single X Double Weld Backing : Yes X No Backing Material : ASTM A 36 Root Opening : Root Face Dimension : Groove Angle : 45 0 Radius (J U) : BASE METALS Material Spec : ASTM Type of Garde : Thickness : Groove : 1 Fillet : Diameter (Pipe) : FILLER METALS AWS Specification : A 5.1 AWS Classification : E7016 SHIELDING Flux : Electrode Flux (Class) : E7016 PREHEAT Preheat Temp. Min : Interpass Temp. Min : Pass or Process Weld Layer (s)
Fillet :
Down
ELECTRICAL CHARACTERISTICS Tranfer Mode (GMAW) Short-Circuiting Globular Spray Current : AC DCEP X DCEN Pulsed Other : Tungsten Electrodes (GTAW) Size : Type : TECHNIQUE Stringer or Weave Bead : Stringer in Root and Weaving Multi-pass or single Pass (per side) : Multi-pass Number of Electrode : Electrde Spacing : Longituginal : Lateral : Angle : Contact Tube to Work Distance : Peening : Inter-pass Cleaning : Wher Brush POSTWELD HEAT TREATMENT Temp. Time. Current Volt Travel Speed Amps. Or Wire Feed Speed 140 Ampere 160 Ampere 160 Ampere 170 Ampere Rge. 130-190 A 71 V 71 V 71 V 71 V 50 mm min 80 mm min 100 mm min 150 mm min
Max : Filler Metals Class Diam. Type & Polarity DCEP DCEP DCEP DCEP
Joint Details
4 mm 4 mm 4 mm 4 mm
2.
Side Bend
Terdapat 3 Retak
VISUAL INSPECTION Appearance ______________________________ Undercute _______________________________ Piping Porosity ___________________________ Convexity _______________________________ Test date ________________________________ Witnessed by ____________________________
Radiographic Ultrasonic Examination RT report no. __________________ Result __________ UT report no. __________________ Result __________ FILLET WELD TEST RESULTS Minimum size multiple-pass Maximum size single-pass Macroetch Macroetch 1. _________ 3. ________ 1. ________ 3. ________ 2. _________ 2. ________ All-weld-metal tension test Tensile strength, psi _______________________________ Yeld point/strength, psi _____________________________ Elongation in 2 in, % _______________________________ Laboratory test no. __________________________
Other Test
Clock no. _________________ Stamp no. _____________ Test number _____________________________________ Per ____________________________________________
We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in confermance with the requiretments of Section 4 of AWS D1.1/D1.1M, (2006) Structural Welding Code Steel.
Signed ___________________________________________
Manufacturer Contractor
By ___________________________________________ Title ___________________________________________ Date ___________________________________________ _______________ _____________________________________________________________________________________ Form E-1 (Back)
Backing (YES or NO) [Table 4.11, item (7)] Yes Material/Spec. ASTM A 36 Base Metal Thicness : (Plate) Groove 1 Fillet _________________ Thickness : (Pipa/tube) Groove _________________ Fillet _________________ Diameter (pipe) _________________ Groove _________________ Fillet _________________ Filler Metal [Table 4.11, item (3)] Spec No. A 5.1 Class E7016 F-No. [Table 4.11, item (2)] _________________ Gas/flux Type [Table 4.11, item (3)] _________________ Other ______________________________________________________________________
____________________
VISUAL INSPECTION (4.8.1) Acceptable YES or NO Culded Bend Test Results (4.30.5) Type Side Bend Result Ada cacat retak dengan max. ukuran 3,7 mm Type Side Bend Result Ada cacat retak dengan max. Ukuran 3,2 mm
Fillet Test Results (4.30.2.3 and 4.30.4.1) Appearance __________________________________ Fillet Size ______________________________________ Fracture Test Root Penetration __________________ Macroetch _____________________________________ (Describe the location, nature, and size of any crack or tearing of the specimen)
LEMBAR KERJA PESANAN UNTUK MEMBUAT BATANG UJI Work Sheet for Making of Test Piece Order
Laporan No Report No Komoditi Comodity Di buat untuk Executed for : Alat Ukur Suhu Temperature : : -
Standar Uji : AWS D1.1 Test Standard Test Plate for Unlimited Thickness Welder Qualification Hal : Dari : Sheet Of
Uraian Description
Teknisi Technician
Penyelia : Supervisior
LEMBAR KERJA PESANAN UNTUK MEMBUAT BATANG UJI Work Sheet for Making of Test Piece Order
Laporan No Report No Komoditi Comodity Di buat untuk Executed for : Alat Ukur Suhu Temperature : : -
Uraian Description
25,4 mm
150 mm
Teknisi Technician
Penyelia : Supervisior
Uraian Description Contoh No. Samples No. Batang No. Specimens No.
Side Bend Test 2 2 Tebal 10, 275 x Lebar 24,9 255,8475 mm 1,5
mm, lebar x tebal, mm mm, widht x thickness, mm Diameter Duri Lengkung Pin Diameter of Bending
Sudut Lengkung Bend Angle Hasil Uji Test Result 3 cacat : 1. 3,2 mm 2. 2,45 mm 3. 2 mm Ref. AWS D1.1 4.30.5 dan 4.8.3.3 Reject Kepala Lab. Logam Metal Lab. Leader :
Penyelia : Supervisior
SEKIAN
dan