You are on page 1of 11

ABB Stotz Kontakt Training page - 1 18.03.2005 / V1.

Advant Controller 500

The first steps

AC500: The First steps

Overview

From start of the programming software PS501 to the online- Test Defining the target PLC and the controller configuration Adjust the communication port

ABB Stotz Kontakt Training page - 2 The first steps AC500

AC500: The First steps

Coming Up

From start of the programming software PS501 to the online- Test Defining the target PLC and the controller configuration Adjust the communication port

ABB Stotz Kontakt Training page - 3 The first steps AC500

AC500: The First steps Condition:

From Start Of

PS501 To The Online- Test

The hardware it completly installed and ready for operation

The single actions in an overview: 1. Define the controller configuration and declare the variables (later more) 2. Enter the program for the single POUs with one of the editors
ABB Stotz Kontakt Training page - 4 The first steps AC500

3. Adjust the communication port (later more) 4. Login

5. Start the program


6. Test it

AC500: The First steps

Coming Up

From start of the programming software PS501 to the online- Test Defining the target PLC and the controller configuration Adjust the communication port

ABB Stotz Kontakt Training page - 5 The first steps AC500

AC500: The First steps 1. File new

Defining The Target Controller

3 4
ABB Stotz Kontakt Training page - 6 The first steps AC500

AC500: The First steps 1. Resources

Defining The Controller Configuration


PLC configuration

2 1
3
ABB Stotz Kontakt Training page - 7 The first steps AC500

2. Add the modules according their arrangement at the I/O - bus, by this the addresses are assigned 3. Enter the symbolic names and comment for the in-/ outputs (also possible to import them from already created files)

AC500: The First steps

Coming Up

From start of the programming software PS501 to the online- Test

Defining the target PLC and the controller configuration


Adjust the communication port

ABB Stotz Kontakt Training page - 8 The first steps AC500

AC500: The First steps

Adjust The Communication Port

- To program via COM1 or COM2:

COM1
Online access (Programmingsoftware) MODBUS
ABB Stotz Kontakt Training page - 9 The first steps AC500

COM2
Online access (Programmingsoftware) MODBUS ASCII

ASCII CS31 FieldBus

AC500: The First steps

Adjust The Communication Port

To program via COM1 or COM2:

1 Resources 2 3 4
ABB Stotz Kontakt Training page - 10 The first steps AC500

PLC configuration

Online access is the mode for programming and testing the program

ABB Stotz Kontakt Training page - 11 18.03.2005 / V1.0

END FIN ENDE END


STO/ VPS Training

You might also like